From josiah at josiahritchie.com  Thu Dec  1 21:49:31 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Thu, 1 Dec 2011 22:49:31 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
Message-ID: <CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>

We will not be open on the 8th for the typical open hack night. As far as I
know, we will be able to be open on the 15th.

JSR/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111201/ec6afc42/attachment.htm>

From saxywolf at gmail.com  Thu Dec  1 21:51:11 2011
From: saxywolf at gmail.com (Ellis Farmer)
Date: Thu, 1 Dec 2011 22:51:11 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
Message-ID: <CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>

I bet I'd be able to make it on the 8th ;)
-Ellis


On Thu, Dec 1, 2011 at 10:49 PM, Josiah Ritchie <josiah at josiahritchie.com>wrote:

> We will not be open on the 8th for the typical open hack night. As far as
> I know, we will be able to be open on the 15th.
>
> JSR/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111201/2aabe343/attachment.htm>

From staticphantom at gmail.com  Thu Dec  1 21:58:29 2011
From: staticphantom at gmail.com (Will)
Date: Thu, 1 Dec 2011 22:58:29 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
Message-ID: <CAO8063W-UL0u-WNA4hn=QkW+RCFRCtjp6_QZTB+R2W92+3iMGQ@mail.gmail.com>

This month is bad. I won't be able to make it to any of them until
before Christmas or after Christmas. Work is pilling up so we can have
plenty of stuff done before shutdown at our customer site.

-Will

On Thu, Dec 1, 2011 at 10:51 PM, Ellis Farmer <saxywolf at gmail.com> wrote:
> I bet I'd be able to make it on the 8th ;)
> -Ellis
>
>
>
> On Thu, Dec 1, 2011 at 10:49 PM, Josiah Ritchie <josiah at josiahritchie.com>
> wrote:
>>
>> We will not be open on the 8th for the typical open hack night. As far as
>> I know, we will be able to be open on the 15th.
>>
>> JSR/
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>



From josiah at josiahritchie.com  Thu Dec  1 22:00:40 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Thu, 1 Dec 2011 23:00:40 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
Message-ID: <CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>

Yeah!

I know it was a joke, but if you can and Ellis is in town it may be worth
getting together even just the three of us. Matthew will be out of town,
but it would be good to pick the momentum up and resync.

JSR/
On Dec 1, 2011 10:52 PM, "Ellis Farmer" <saxywolf at gmail.com> wrote:

> I bet I'd be able to make it on the 8th ;)
> -Ellis
>
>
> On Thu, Dec 1, 2011 at 10:49 PM, Josiah Ritchie <josiah at josiahritchie.com>wrote:
>
>> We will not be open on the 8th for the typical open hack night. As far as
>> I know, we will be able to be open on the 15th.
>>
>> JSR/
>>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111201/7b798606/attachment.htm>

From saxywolf at gmail.com  Thu Dec  1 22:05:27 2011
From: saxywolf at gmail.com (Ellis Farmer)
Date: Thu, 1 Dec 2011 23:05:27 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>
Message-ID: <CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>

Offsite meeting/hacking? I'm game.  This job should be done by then (I
pray).

-Ellis


On Thu, Dec 1, 2011 at 11:00 PM, Josiah Ritchie <josiah at josiahritchie.com>wrote:

> Yeah!
>
> I know it was a joke, but if you can and Ellis is in town it may be worth
> getting together even just the three of us. Matthew will be out of town,
> but it would be good to pick the momentum up and resync.
>
> JSR/
> On Dec 1, 2011 10:52 PM, "Ellis Farmer" <saxywolf at gmail.com> wrote:
>
>> I bet I'd be able to make it on the 8th ;)
>> -Ellis
>>
>>
>> On Thu, Dec 1, 2011 at 10:49 PM, Josiah Ritchie <josiah at josiahritchie.com
>> > wrote:
>>
>>> We will not be open on the 8th for the typical open hack night. As far
>>> as I know, we will be able to be open on the 15th.
>>>
>>> JSR/
>>>
>>
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>>
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>
>>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111201/83c7bca6/attachment.htm>

From whatever at taggers.org  Thu Dec  1 23:16:21 2011
From: whatever at taggers.org (whatever)
Date: Fri, 02 Dec 2011 00:16:21 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>
	<CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>
Message-ID: <4ED85F25.6030301@taggers.org>

i'll join too, we can probably use my house if thats desired, and no-one 
is allergic to cats.



From staticphantom at gmail.com  Fri Dec  2 07:54:04 2011
From: staticphantom at gmail.com (Will)
Date: Fri, 2 Dec 2011 08:54:04 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <4ED85F25.6030301@taggers.org>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>
	<CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>
	<4ED85F25.6030301@taggers.org>
Message-ID: <CAO8063V=QisxfwDb_G34HYhJ8c0XLbmRJTTfu+TT5vESzdgMBQ@mail.gmail.com>

Hmm... let me make some calls. Is anyone opposed to meeting in
Bethlehem? I think I might be able to set up something for meeting up
in the BAVTS. It's right next to Freedom High School.

-Will

On Fri, Dec 2, 2011 at 12:16 AM, whatever <whatever at taggers.org> wrote:
> i'll join too, we can probably use my house if thats desired, and no-one is
> allergic to cats.
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com



From josiah at josiahritchie.com  Fri Dec  2 08:58:21 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Fri, 2 Dec 2011 09:58:21 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <4ED85F25.6030301@taggers.org>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>
	<CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>
	<4ED85F25.6030301@taggers.org>
Message-ID: <CANyh6VtZMrpK_crnfP0rBE2fNryDX-S=MirUFHFj4O2Mxygd3Q@mail.gmail.com>

Thanks Jonas. Would you need to adjust the time or anything?

Praying with you Ellis! How long has this 6 week trip been now?

JSR/
On Dec 2, 2011 12:16 AM, "whatever" <whatever at taggers.org> wrote:

> i'll join too, we can probably use my house if thats desired, and no-one
> is allergic to cats.
>
> ______________________________**_________________
> Makelehighvalley mailing list
> Makelehighvalley@**makelehighvalley.com<Makelehighvalley at makelehighvalley.com>
> http://makelehighvalley.com/**mailman/listinfo/**makelehighvalley_**
> makelehighvalley.com<http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111202/95496c0a/attachment.htm>

From saxywolf at gmail.com  Fri Dec  2 09:07:12 2011
From: saxywolf at gmail.com (Ellis Farmer)
Date: Fri, 2 Dec 2011 10:07:12 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CANyh6VtZMrpK_crnfP0rBE2fNryDX-S=MirUFHFj4O2Mxygd3Q@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>
	<CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>
	<4ED85F25.6030301@taggers.org>
	<CANyh6VtZMrpK_crnfP0rBE2fNryDX-S=MirUFHFj4O2Mxygd3Q@mail.gmail.com>
Message-ID: <CAJeZOyHO3S+ja5-zco8ELRafsxAXNT=jQ1KnPZXBhvJvKa47zw@mail.gmail.com>

10 weeks (Including the 4 days I came back here and worked on the weekend).
 I actually got back from Chicago on Thanksgiving (about 2 am).  But since
then the only days I haven't worked were Thanksgiving and the day after
during which my dad wanted to do stuff around the house so I didn't get
much relaxing time.  Most days have been late nights... and twice this week
I've done all nighters.  And I'll be working this weekend.  A lot of catch
up work do do... and all this week I've spent doing Chicago work!  :(

I spent all my time in Chicago working or recovering from night shifts that
I didn't even touch anything I'm working on. Anyway... my first deadline is
today...

-Ellis
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111202/de864ad0/attachment.htm>

From josiah at josiahritchie.com  Fri Dec  2 09:33:11 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Fri, 2 Dec 2011 10:33:11 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CAJeZOyHO3S+ja5-zco8ELRafsxAXNT=jQ1KnPZXBhvJvKa47zw@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>
	<CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>
	<4ED85F25.6030301@taggers.org>
	<CANyh6VtZMrpK_crnfP0rBE2fNryDX-S=MirUFHFj4O2Mxygd3Q@mail.gmail.com>
	<CAJeZOyHO3S+ja5-zco8ELRafsxAXNT=jQ1KnPZXBhvJvKa47zw@mail.gmail.com>
Message-ID: <CANyh6VvG5GyVzWju_G2xETS57xOxJCfsq_eHpqvxk6qJKhsz0A@mail.gmail.com>

Wow, sounds like quite a story. Must be good to see the light at the end of
the tunnel.

May you meet all your deadlines,
JSR/

On Fri, Dec 2, 2011 at 10:07 AM, Ellis Farmer <saxywolf at gmail.com> wrote:

> 10 weeks (Including the 4 days I came back here and worked on the
> weekend).  I actually got back from Chicago on Thanksgiving (about 2 am).
>  But since then the only days I haven't worked were Thanksgiving and the
> day after during which my dad wanted to do stuff around the house so I
> didn't get much relaxing time.  Most days have been late nights... and
> twice this week I've done all nighters.  And I'll be working this weekend.
>  A lot of catch up work do do... and all this week I've spent doing Chicago
> work!  :(
>
> I spent all my time in Chicago working or recovering from night shifts
> that I didn't even touch anything I'm working on. Anyway... my first
> deadline is today...
>
> -Ellis
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111202/54f6e703/attachment.htm>

From davelozinger at gmail.com  Fri Dec  2 09:40:49 2011
From: davelozinger at gmail.com (Dave Lozinger)
Date: Fri, 2 Dec 2011 10:40:49 -0500
Subject: [MakeLV] Makelehighvalley Digest, Vol 14, Issue 1
In-Reply-To: <mailman.25.1322837907.14657.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
References: <mailman.25.1322837907.14657.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
Message-ID: <008CE8DB-D2AC-40A9-B311-197A3016D76A@gmail.com>





On Dec 2, 2011, at 9:58 AM, makelehighvalley-request at makelehighvalley.com wrote:

> Send Makelehighvalley mailing list submissions to
>    makelehighvalley at makelehighvalley.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>    http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
> 
> or, via email, send a message with subject or body 'help' to
>    makelehighvalley-request at makelehighvalley.com
> 
> You can reach the person managing the list at
>    makelehighvalley-owner at makelehighvalley.com
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Makelehighvalley digest..."
> 
> 
> Today's Topics:
> 
>   1. No open hack on the 8th (Josiah Ritchie)
>   2. Re: No open hack on the 8th (Ellis Farmer)
>   3. Re: No open hack on the 8th (Will)
>   4. Re: No open hack on the 8th (Josiah Ritchie)
>   5. Re: No open hack on the 8th (Ellis Farmer)
>   6. Re: No open hack on the 8th (whatever)
>   7. Re: No open hack on the 8th (Will)
>   8. Re: No open hack on the 8th (Josiah Ritchie)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Thu, 1 Dec 2011 22:49:31 -0500
> From: Josiah Ritchie <josiah at josiahritchie.com>
> To: makelehighvalley <makelehighvalley at makelehighvalley.com>
> Subject: [MakeLV] No open hack on the 8th
> Message-ID:
>    <CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> We will not be open on the 8th for the typical open hack night. As far as I
> know, we will be able to be open on the 15th.
> 
> JSR/
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111201/ec6afc42/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 2
> Date: Thu, 1 Dec 2011 22:51:11 -0500
> From: Ellis Farmer <saxywolf at gmail.com>
> To: "Build things for fun!" <makelehighvalley at makelehighvalley.com>
> Subject: Re: [MakeLV] No open hack on the 8th
> Message-ID:
>    <CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> I bet I'd be able to make it on the 8th ;)
> -Ellis
> 
> 
> On Thu, Dec 1, 2011 at 10:49 PM, Josiah Ritchie <josiah at josiahritchie.com>wrote:
> 
>> We will not be open on the 8th for the typical open hack night. As far as
>> I know, we will be able to be open on the 15th.
>> 
>> JSR/
>> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111201/2aabe343/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 3
> Date: Thu, 1 Dec 2011 22:58:29 -0500
> From: Will <staticphantom at gmail.com>
> To: "Build things for fun!" <makelehighvalley at makelehighvalley.com>
> Subject: Re: [MakeLV] No open hack on the 8th
> Message-ID:
>    <CAO8063W-UL0u-WNA4hn=QkW+RCFRCtjp6_QZTB+R2W92+3iMGQ at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> This month is bad. I won't be able to make it to any of them until
> before Christmas or after Christmas. Work is pilling up so we can have
> plenty of stuff done before shutdown at our customer site.
> 
> -Will
> 
> On Thu, Dec 1, 2011 at 10:51 PM, Ellis Farmer <saxywolf at gmail.com> wrote:
>> I bet I'd be able to make it on the 8th ;)
>> -Ellis
>> 
>> 
>> 
>> On Thu, Dec 1, 2011 at 10:49 PM, Josiah Ritchie <josiah at josiahritchie.com>
>> wrote:
>>> 
>>> We will not be open on the 8th for the typical open hack night. As far as
>>> I know, we will be able to be open on the 15th.
>>> 
>>> JSR/
>> 
>> 
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>> 
> 
> 
> 
> ------------------------------
> 
> Message: 4
> Date: Thu, 1 Dec 2011 23:00:40 -0500
> From: Josiah Ritchie <josiah at josiahritchie.com>
> To: "Build things for fun!" <makelehighvalley at makelehighvalley.com>
> Subject: Re: [MakeLV] No open hack on the 8th
> Message-ID:
>    <CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> Yeah!
> 
> I know it was a joke, but if you can and Ellis is in town it may be worth
> getting together even just the three of us. Matthew will be out of town,
> but it would be good to pick the momentum up and resync.
> 
> JSR/
> On Dec 1, 2011 10:52 PM, "Ellis Farmer" <saxywolf at gmail.com> wrote:
> 
>> I bet I'd be able to make it on the 8th ;)
>> -Ellis
>> 
>> 
>> On Thu, Dec 1, 2011 at 10:49 PM, Josiah Ritchie <josiah at josiahritchie.com>wrote:
>> 
>>> We will not be open on the 8th for the typical open hack night. As far as
>>> I know, we will be able to be open on the 15th.
>>> 
>>> JSR/
>>> 
>> 
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>> 
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>> 
>> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111201/7b798606/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 5
> Date: Thu, 1 Dec 2011 23:05:27 -0500
> From: Ellis Farmer <saxywolf at gmail.com>
> To: "Build things for fun!" <makelehighvalley at makelehighvalley.com>
> Subject: Re: [MakeLV] No open hack on the 8th
> Message-ID:
>    <CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> Offsite meeting/hacking? I'm game.  This job should be done by then (I
> pray).
> 
> -Ellis
> 
> 
> On Thu, Dec 1, 2011 at 11:00 PM, Josiah Ritchie <josiah at josiahritchie.com>wrote:
> 
>> Yeah!
>> 
>> I know it was a joke, but if you can and Ellis is in town it may be worth
>> getting together even just the three of us. Matthew will be out of town,
>> but it would be good to pick the momentum up and resync.
>> 
>> JSR/
>> On Dec 1, 2011 10:52 PM, "Ellis Farmer" <saxywolf at gmail.com> wrote:
>> 
>>> I bet I'd be able to make it on the 8th ;)
>>> -Ellis
>>> 
>>> 
>>> On Thu, Dec 1, 2011 at 10:49 PM, Josiah Ritchie <josiah at josiahritchie.com
>>>> wrote:
>>> 
>>>> We will not be open on the 8th for the typical open hack night. As far
>>>> as I know, we will be able to be open on the 15th.
>>>> 
>>>> JSR/
>>>> 
>>> 
>>> _______________________________________________
>>> Makelehighvalley mailing list
>>> Makelehighvalley at makelehighvalley.com
>>> 
>>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>> 
>>> 
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>> 
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>> 
>> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111201/83c7bca6/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 6
> Date: Fri, 02 Dec 2011 00:16:21 -0500
> From: whatever <whatever at taggers.org>
> To: "Build things for fun!" <makelehighvalley at makelehighvalley.com>
> Subject: Re: [MakeLV] No open hack on the 8th
> Message-ID: <4ED85F25.6030301 at taggers.org>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> 
> i'll join too, we can probably use my house if thats desired, and no-one 
> is allergic to cats.
> 
> 
> 
> ------------------------------
> 
> Message: 7
> Date: Fri, 2 Dec 2011 08:54:04 -0500
> From: Will <staticphantom at gmail.com>
> To: "Build things for fun!" <makelehighvalley at makelehighvalley.com>
> Subject: Re: [MakeLV] No open hack on the 8th
> Message-ID:
>    <CAO8063V=QisxfwDb_G34HYhJ8c0XLbmRJTTfu+TT5vESzdgMBQ at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> Hmm... let me make some calls. Is anyone opposed to meeting in
> Bethlehem? I think I might be able to set up something for meeting up
> in the BAVTS. It's right next to Freedom High School.
> 
> -Will
> 
> On Fri, Dec 2, 2011 at 12:16 AM, whatever <whatever at taggers.org> wrote:
>> i'll join too, we can probably use my house if thats desired, and no-one is
>> allergic to cats.
>> 
>> 
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
> 
> 
> 
> ------------------------------
> 
> Message: 8
> Date: Fri, 2 Dec 2011 09:58:21 -0500
> From: Josiah Ritchie <josiah at josiahritchie.com>
> To: "Build things for fun!" <makelehighvalley at makelehighvalley.com>
> Subject: Re: [MakeLV] No open hack on the 8th
> Message-ID:
>    <CANyh6VtZMrpK_crnfP0rBE2fNryDX-S=MirUFHFj4O2Mxygd3Q at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> Thanks Jonas. Would you need to adjust the time or anything?
> 
> Praying with you Ellis! How long has this 6 week trip been now?
> 
> JSR/
> On Dec 2, 2011 12:16 AM, "whatever" <whatever at taggers.org> wrote:
> 
>> i'll join too, we can probably use my house if thats desired, and no-one
>> is allergic to cats.
>> 
>> ______________________________**_________________
>> Makelehighvalley mailing list
>> Makelehighvalley@**makelehighvalley.com<Makelehighvalley at makelehighvalley.com>
>> http://makelehighvalley.com/**mailman/listinfo/**makelehighvalley_**
>> makelehighvalley.com<http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com>
>> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111202/95496c0a/attachment.html>
> 
> ------------------------------
> 
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
> 
> 
> End of Makelehighvalley Digest, Vol 14, Issue 1
> ***********************************************



From josiah.ritchie at gmail.com  Fri Dec  2 09:48:03 2011
From: josiah.ritchie at gmail.com (Josiah Ritchie)
Date: Fri, 2 Dec 2011 10:48:03 -0500
Subject: [MakeLV] Local Uprint Plus
Message-ID: <CANyh6Vs1iTtgvtxZhdwXqHEQn6zONnED+SasLM3BeRqdNsWUBg@mail.gmail.com>

We received a message on our website from a local guy with a Uprint
Plus who is offering his services. I think this is what he's talking
about:
http://www.uprint3dprinting.com/3d-printers/3d-printer-uprintplus.aspx

His contact info is below.

JSR/

---------- Forwarded message ----------
Date: Thu, Dec 1, 2011 at 1:33 PM
Subject: [makelv] Re: About Us
To: josiah.ritchie at gmail.com

Alex <itel933 at netscape.net> (unregistered) wrote:

Hello. My name is Alex, I'm a local inventor. I recently purchased a
Uprint plus, a rapid prototyping machine. I just wanted to introduce
myself to you and possibly obtaining info on your club and whether or
not we can help each other bring a product to market. The machine
makes models from ABS plus plastics. If I can offer your club a great
deal on models, it would help me pay off the machine sooner and give
your member a great deal on parts. Let me know if this is something
you'd be interested in. If I don't pick up please leave a voicemail.


Alex

914-210-1982



From whatever at taggers.org  Fri Dec  2 16:50:44 2011
From: whatever at taggers.org (whatever)
Date: Fri, 02 Dec 2011 17:50:44 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CANyh6VtZMrpK_crnfP0rBE2fNryDX-S=MirUFHFj4O2Mxygd3Q@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>
	<CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>
	<4ED85F25.6030301@taggers.org>
	<CANyh6VtZMrpK_crnfP0rBE2fNryDX-S=MirUFHFj4O2Mxygd3Q@mail.gmail.com>
Message-ID: <4ED95644.3080106@taggers.org>

no the normal open hack night times work, thought you might have to drag 
me off of facebook, or out of a book when you arrive.

On 12/2/2011 9:58 AM, Josiah Ritchie wrote:
>
> Thanks Jonas. Would you need to adjust the time or anything?
>
> Praying with you Ellis! How long has this 6 week trip been now?
>
> JSR/
>
> On Dec 2, 2011 12:16 AM, "whatever" <whatever at taggers.org 
> <mailto:whatever at taggers.org>> wrote:
>
>     i'll join too, we can probably use my house if thats desired, and
>     no-one is allergic to cats.
>
>     _______________________________________________
>     Makelehighvalley mailing list
>     Makelehighvalley at makelehighvalley.com
>     <mailto:Makelehighvalley at makelehighvalley.com>
>     http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111202/a80db298/attachment.htm>

From josiah at josiahritchie.com  Mon Dec  5 10:25:04 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Mon, 5 Dec 2011 11:25:04 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CAO8063V=QisxfwDb_G34HYhJ8c0XLbmRJTTfu+TT5vESzdgMBQ@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>
	<CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>
	<4ED85F25.6030301@taggers.org>
	<CAO8063V=QisxfwDb_G34HYhJ8c0XLbmRJTTfu+TT5vESzdgMBQ@mail.gmail.com>
Message-ID: <CANyh6VvE2Vom+RpX5X_0wtUKJ1_eC7oSv9nXnFzU3+nv9vCyjQ@mail.gmail.com>

I just saw this Will. If you could get us into a technical school for
a meeting, that'd be a great relationship to start building and
probably provide more room than Ellis' house. Is that still an option?

JSR/

On Fri, Dec 2, 2011 at 8:54 AM, Will <staticphantom at gmail.com> wrote:
> Hmm... let me make some calls. Is anyone opposed to meeting in
> Bethlehem? I think I might be able to set up something for meeting up
> in the BAVTS. It's right next to Freedom High School.
>
> -Will



From saxywolf at gmail.com  Mon Dec  5 11:01:13 2011
From: saxywolf at gmail.com (Ellis Farmer)
Date: Mon, 5 Dec 2011 12:01:13 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CANyh6VvE2Vom+RpX5X_0wtUKJ1_eC7oSv9nXnFzU3+nv9vCyjQ@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>
	<CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>
	<4ED85F25.6030301@taggers.org>
	<CAO8063V=QisxfwDb_G34HYhJ8c0XLbmRJTTfu+TT5vESzdgMBQ@mail.gmail.com>
	<CANyh6VvE2Vom+RpX5X_0wtUKJ1_eC7oSv9nXnFzU3+nv9vCyjQ@mail.gmail.com>
Message-ID: <CAJeZOyHbgcfATa20oaAQJDvw-ZgC265=hQB8mkzWnoyNDm1rEw@mail.gmail.com>

Well... no.  I wish it were.

Also, I might not even be able to go to this weeks meeting as we still have
70 odd reports to do. Plus, I have guests coming this weekend (they
decided) and I have to clean up for them. :(

Besides, I don't live near the main part of the group.  That and BBQ
weather would be more ideal for my place as the garage is not insulated.

-Ellis


On Mon, Dec 5, 2011 at 11:25 AM, Josiah Ritchie <josiah at josiahritchie.com>wrote:

> I just saw this Will. If you could get us into a technical school for
> a meeting, that'd be a great relationship to start building and
> probably provide more room than Ellis' house. Is that still an option?
>
> JSR/
>
> On Fri, Dec 2, 2011 at 8:54 AM, Will <staticphantom at gmail.com> wrote:
> > Hmm... let me make some calls. Is anyone opposed to meeting in
> > Bethlehem? I think I might be able to set up something for meeting up
> > in the BAVTS. It's right next to Freedom High School.
> >
> > -Will
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111205/452f940b/attachment.htm>

From josiah at josiahritchie.com  Mon Dec  5 13:31:47 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Mon, 5 Dec 2011 14:31:47 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CAJeZOyHbgcfATa20oaAQJDvw-ZgC265=hQB8mkzWnoyNDm1rEw@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>
	<CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>
	<4ED85F25.6030301@taggers.org>
	<CAO8063V=QisxfwDb_G34HYhJ8c0XLbmRJTTfu+TT5vESzdgMBQ@mail.gmail.com>
	<CANyh6VvE2Vom+RpX5X_0wtUKJ1_eC7oSv9nXnFzU3+nv9vCyjQ@mail.gmail.com>
	<CAJeZOyHbgcfATa20oaAQJDvw-ZgC265=hQB8mkzWnoyNDm1rEw@mail.gmail.com>
Message-ID: <CANyh6VvhOht_hxkV+sNDHu3aZfyK9nDPEJ2PECiy6LGWVjZ8uw@mail.gmail.com>

Lol, I meant Jonas' place. Sorry for the confusion.
On Dec 5, 2011 12:02 PM, "Ellis Farmer" <saxywolf at gmail.com> wrote:

> Well... no.  I wish it were.
>
> Also, I might not even be able to go to this weeks meeting as we still
> have 70 odd reports to do. Plus, I have guests coming this weekend (they
> decided) and I have to clean up for them. :(
>
> Besides, I don't live near the main part of the group.  That and BBQ
> weather would be more ideal for my place as the garage is not insulated.
>
> -Ellis
>
>
> On Mon, Dec 5, 2011 at 11:25 AM, Josiah Ritchie <josiah at josiahritchie.com>wrote:
>
>> I just saw this Will. If you could get us into a technical school for
>> a meeting, that'd be a great relationship to start building and
>> probably provide more room than Ellis' house. Is that still an option?
>>
>> JSR/
>>
>> On Fri, Dec 2, 2011 at 8:54 AM, Will <staticphantom at gmail.com> wrote:
>> > Hmm... let me make some calls. Is anyone opposed to meeting in
>> > Bethlehem? I think I might be able to set up something for meeting up
>> > in the BAVTS. It's right next to Freedom High School.
>> >
>> > -Will
>>
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>>
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111205/c82a4fe7/attachment.htm>

From steckelj at jaredsroom.com  Tue Dec  6 07:05:28 2011
From: steckelj at jaredsroom.com (Jared Steckel)
Date: Tue, 6 Dec 2011 08:05:28 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CAJeZOyHbgcfATa20oaAQJDvw-ZgC265=hQB8mkzWnoyNDm1rEw@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>	<CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>	<4ED85F25.6030301@taggers.org>	<CAO8063V=QisxfwDb_G34HYhJ8c0XLbmRJTTfu+TT5vESzdgMBQ@mail.gmail.com>	<CANyh6VvE2Vom+RpX5X_0wtUKJ1_eC7oSv9nXnFzU3+nv9vCyjQ@mail.gmail.com>
	<CAJeZOyHbgcfATa20oaAQJDvw-ZgC265=hQB8mkzWnoyNDm1rEw@mail.gmail.com>
Message-ID: <004f01ccb417$bb2eb670$318c2350$@jaredsroom.com>

I have some connections to LCTI, BAVTS and CIT through work.  What would we
be looking to do there?  

 

J

 

From: makelehighvalley-bounces at makelehighvalley.com
[mailto:makelehighvalley-bounces at makelehighvalley.com] On Behalf Of Ellis
Farmer
Sent: Monday, December 05, 2011 12:01 PM
To: Build things for fun!
Subject: Re: [MakeLV] No open hack on the 8th

 

Well... no.  I wish it were.

 

Also, I might not even be able to go to this weeks meeting as we still have
70 odd reports to do. Plus, I have guests coming this weekend (they decided)
and I have to clean up for them. :(

 

Besides, I don't live near the main part of the group.  That and BBQ weather
would be more ideal for my place as the garage is not insulated.


-Ellis



On Mon, Dec 5, 2011 at 11:25 AM, Josiah Ritchie <josiah at josiahritchie.com>
wrote:

I just saw this Will. If you could get us into a technical school for
a meeting, that'd be a great relationship to start building and
probably provide more room than Ellis' house. Is that still an option?

JSR/


On Fri, Dec 2, 2011 at 8:54 AM, Will <staticphantom at gmail.com> wrote:
> Hmm... let me make some calls. Is anyone opposed to meeting in
> Bethlehem? I think I might be able to set up something for meeting up
> in the BAVTS. It's right next to Freedom High School.
>
> -Will

_______________________________________________
Makelehighvalley mailing list
Makelehighvalley at makelehighvalley.com
http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvall
ey.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111206/a50c4574/attachment.htm>

From josiah at josiahritchie.com  Tue Dec  6 07:21:55 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Tue, 6 Dec 2011 08:21:55 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <004f01ccb417$bb2eb670$318c2350$@jaredsroom.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>
	<CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>
	<4ED85F25.6030301@taggers.org>
	<CAO8063V=QisxfwDb_G34HYhJ8c0XLbmRJTTfu+TT5vESzdgMBQ@mail.gmail.com>
	<CANyh6VvE2Vom+RpX5X_0wtUKJ1_eC7oSv9nXnFzU3+nv9vCyjQ@mail.gmail.com>
	<CAJeZOyHbgcfATa20oaAQJDvw-ZgC265=hQB8mkzWnoyNDm1rEw@mail.gmail.com>
	<004f01ccb417$bb2eb670$318c2350$@jaredsroom.com>
Message-ID: <CANyh6Vu=x7q9ze2SLMpdDZmfRcw+_gNwoqFWdaDC0dix0GHhSA@mail.gmail.com>

Times when time has us out of the space due to access issues, we'd be
looking for an alternate location to meet and muck around with things.

JSR/

On Tue, Dec 6, 2011 at 8:05 AM, Jared Steckel <steckelj at jaredsroom.com> wrote:
> I have some connections to LCTI, BAVTS and CIT through work.? What would we
> be looking to do there?
>
>
>
> J
>
>
>
> From: makelehighvalley-bounces at makelehighvalley.com
> [mailto:makelehighvalley-bounces at makelehighvalley.com] On Behalf Of Ellis
> Farmer
> Sent: Monday, December 05, 2011 12:01 PM
> To: Build things for fun!
> Subject: Re: [MakeLV] No open hack on the 8th
>
>
>
> Well... no. ?I wish it were.
>
>
>
> Also, I might not even be able to go to this weeks meeting as we still have
> 70 odd reports to do. Plus, I have guests coming this weekend (they decided)
> and I have to clean up for them. :(
>
>
>
> Besides, I don't live near the main part of the group. ?That and BBQ weather
> would be more ideal for my place as the garage is not insulated.
>
> -Ellis
>
> On Mon, Dec 5, 2011 at 11:25 AM, Josiah Ritchie <josiah at josiahritchie.com>
> wrote:
>
> I just saw this Will. If you could get us into a technical school for
> a meeting, that'd be a great relationship to start building and
> probably provide more room than Ellis' house. Is that still an option?
>
> JSR/
>
> On Fri, Dec 2, 2011 at 8:54 AM, Will <staticphantom at gmail.com> wrote:
>> Hmm... let me make some calls. Is anyone opposed to meeting in
>> Bethlehem? I think I might be able to set up something for meeting up
>> in the BAVTS. It's right next to Freedom High School.
>>
>> -Will
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>



-- 

http://about.me/josiah



From steckelj at jaredsroom.com  Tue Dec  6 08:32:35 2011
From: steckelj at jaredsroom.com (Jared Steckel)
Date: Tue, 6 Dec 2011 09:32:35 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <CANyh6Vu=x7q9ze2SLMpdDZmfRcw+_gNwoqFWdaDC0dix0GHhSA@mail.gmail.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>	<CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>	<4ED85F25.6030301@taggers.org>	<CAO8063V=QisxfwDb_G34HYhJ8c0XLbmRJTTfu+TT5vESzdgMBQ@mail.gmail.com>	<CANyh6VvE2Vom+RpX5X_0wtUKJ1_eC7oSv9nXnFzU3+nv9vCyjQ@mail.gmail.com>	<CAJeZOyHbgcfATa20oaAQJDvw-ZgC265=hQB8mkzWnoyNDm1rEw@mail.gmail.com>	<004f01ccb417$bb2eb670$318c2350$@jaredsroom.com>
	<CANyh6Vu=x7q9ze2SLMpdDZmfRcw+_gNwoqFWdaDC0dix0GHhSA@mail.gmail.com>
Message-ID: <005a01ccb423$e63c0550$b2b40ff0$@jaredsroom.com>

I work with their IT depts.  I'll see what I can come up with.  BAVTS is probably best location-wise, right?

-----Original Message-----
From: makelehighvalley-bounces at makelehighvalley.com [mailto:makelehighvalley-bounces at makelehighvalley.com] On Behalf Of Josiah Ritchie
Sent: Tuesday, December 06, 2011 8:22 AM
To: Build things for fun!
Subject: Re: [MakeLV] No open hack on the 8th

Times when time has us out of the space due to access issues, we'd be looking for an alternate location to meet and muck around with things.

JSR/

On Tue, Dec 6, 2011 at 8:05 AM, Jared Steckel <steckelj at jaredsroom.com> wrote:
> I have some connections to LCTI, BAVTS and CIT through work.  What 
> would we be looking to do there?
>
>
>
> J
>
>
>
> From: makelehighvalley-bounces at makelehighvalley.com
> [mailto:makelehighvalley-bounces at makelehighvalley.com] On Behalf Of 
> Ellis Farmer
> Sent: Monday, December 05, 2011 12:01 PM
> To: Build things for fun!
> Subject: Re: [MakeLV] No open hack on the 8th
>
>
>
> Well... no.  I wish it were.
>
>
>
> Also, I might not even be able to go to this weeks meeting as we still 
> have
> 70 odd reports to do. Plus, I have guests coming this weekend (they 
> decided) and I have to clean up for them. :(
>
>
>
> Besides, I don't live near the main part of the group.  That and BBQ 
> weather would be more ideal for my place as the garage is not insulated.
>
> -Ellis
>
> On Mon, Dec 5, 2011 at 11:25 AM, Josiah Ritchie 
> <josiah at josiahritchie.com>
> wrote:
>
> I just saw this Will. If you could get us into a technical school for 
> a meeting, that'd be a great relationship to start building and 
> probably provide more room than Ellis' house. Is that still an option?
>
> JSR/
>
> On Fri, Dec 2, 2011 at 8:54 AM, Will <staticphantom at gmail.com> wrote:
>> Hmm... let me make some calls. Is anyone opposed to meeting in 
>> Bethlehem? I think I might be able to set up something for meeting up 
>> in the BAVTS. It's right next to Freedom High School.
>>
>> -Will
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehi
> ghvalley.com
>
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehi
> ghvalley.com
>
>



-- 

http://about.me/josiah

_______________________________________________
Makelehighvalley mailing list
Makelehighvalley at makelehighvalley.com
http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com




From tronwizard at yahoo.com  Tue Dec  6 23:06:37 2011
From: tronwizard at yahoo.com (Mr Thomas Rumpf)
Date: Tue, 6 Dec 2011 21:06:37 -0800 (PST)
Subject: [MakeLV] Alternate Dec8 meetup
In-Reply-To: <mailman.34.1323181975.14657.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
References: <mailman.34.1323181975.14657.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
Message-ID: <1323234397.18436.YahooMailNeo@web130202.mail.mud.yahoo.com>



Concerning the Dec 8 open hack, I think I'll survive not being able to make use of our normal facilities.

If we do manage to arrange an alternate meetup, excellent, if it's a chance to check out a local educational institution, awesome. Might be a good chance to brainstorm and discuss some of the other facets of being a maker space, like our online presence, making videos of ongoing projects, getting dues more organized, and the other administrative things we should be doing.

On the subject of raw materials, I was thinking about metal and plastic containers with large, flat, uniform areas and how to harvest them. If the areas include or run around curves, how to straighten them out.

Ellis, hope you're having at least some fun, we haven't forgotten you, 
just what you look like, but that's the price we pay for your steadfast 
efforts in maintaining the Chicago branch of MakeLV. :-)

Tom R.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111206/f8e26251/attachment.htm>

From staticphantom at gmail.com  Tue Dec  6 23:23:25 2011
From: staticphantom at gmail.com (Will)
Date: Wed, 7 Dec 2011 00:23:25 -0500
Subject: [MakeLV] No open hack on the 8th
In-Reply-To: <005a01ccb423$e63c0550$b2b40ff0$@jaredsroom.com>
References: <CANyh6VsarjgLOzF4xk0-i_HSSg29uyOYmh3CexbYaTLUwMBohQ@mail.gmail.com>
	<CANyh6Vs_EQrKynpsppe4XzF8jofsEMQN5NMvu=uGnje3hoGsMw@mail.gmail.com>
	<CAJeZOyFXEg9M5rmDggBYaVWzp=SjRoZPs8r7HL5FPNo8GJPb3A@mail.gmail.com>
	<CANyh6VvwSA6BiSfc18AOmmLSU+5xuM_sLrYeZr8e3BhPORC4gg@mail.gmail.com>
	<CAJeZOyEWrMj4fvEsDFmU4k_eT=wLSxbxCW52sYz6gXtUNoBwWw@mail.gmail.com>
	<4ED85F25.6030301@taggers.org>
	<CAO8063V=QisxfwDb_G34HYhJ8c0XLbmRJTTfu+TT5vESzdgMBQ@mail.gmail.com>
	<CANyh6VvE2Vom+RpX5X_0wtUKJ1_eC7oSv9nXnFzU3+nv9vCyjQ@mail.gmail.com>
	<CAJeZOyHbgcfATa20oaAQJDvw-ZgC265=hQB8mkzWnoyNDm1rEw@mail.gmail.com>
	<004f01ccb417$bb2eb670$318c2350$@jaredsroom.com>
	<CANyh6Vu=x7q9ze2SLMpdDZmfRcw+_gNwoqFWdaDC0dix0GHhSA@mail.gmail.com>
	<005a01ccb423$e63c0550$b2b40ff0$@jaredsroom.com>
Message-ID: <CAO8063WCwMLMrRAsdLJBOphc_BSQ=jx04njM3n9YBpThC_ivmQ@mail.gmail.com>

I used to work in the BAVTS IT as a student :). Unfortunately I have
to admit work got crazy and will be this month.... I need to work like
hell to secure a future deal with our customer or Ellis will be
visiting me in a potential move to Chicago. If someone else would have
the time call, call Sandy Kline at the BAVTS Adult Education office
and name drop me. The next contact is Judith Milositz or Glenn
Milositz, they were the EET and electronics manufacturing teachers I
had back in high school :). They have benches and oscilloscopes there.
I'll work on seeing if we can get something set up in the future for
sure.

-Will

On Tue, Dec 6, 2011 at 9:32 AM, Jared Steckel <steckelj at jaredsroom.com> wrote:
> I work with their IT depts. ?I'll see what I can come up with. ?BAVTS is probably best location-wise, right?
>
> -----Original Message-----
> From: makelehighvalley-bounces at makelehighvalley.com [mailto:makelehighvalley-bounces at makelehighvalley.com] On Behalf Of Josiah Ritchie
> Sent: Tuesday, December 06, 2011 8:22 AM
> To: Build things for fun!
> Subject: Re: [MakeLV] No open hack on the 8th
>
> Times when time has us out of the space due to access issues, we'd be looking for an alternate location to meet and muck around with things.
>
> JSR/
>
> On Tue, Dec 6, 2011 at 8:05 AM, Jared Steckel <steckelj at jaredsroom.com> wrote:
>> I have some connections to LCTI, BAVTS and CIT through work. ?What
>> would we be looking to do there?
>>
>>
>>
>> J
>>
>>
>>
>> From: makelehighvalley-bounces at makelehighvalley.com
>> [mailto:makelehighvalley-bounces at makelehighvalley.com] On Behalf Of
>> Ellis Farmer
>> Sent: Monday, December 05, 2011 12:01 PM
>> To: Build things for fun!
>> Subject: Re: [MakeLV] No open hack on the 8th
>>
>>
>>
>> Well... no. ?I wish it were.
>>
>>
>>
>> Also, I might not even be able to go to this weeks meeting as we still
>> have
>> 70 odd reports to do. Plus, I have guests coming this weekend (they
>> decided) and I have to clean up for them. :(
>>
>>
>>
>> Besides, I don't live near the main part of the group. ?That and BBQ
>> weather would be more ideal for my place as the garage is not insulated.
>>
>> -Ellis
>>
>> On Mon, Dec 5, 2011 at 11:25 AM, Josiah Ritchie
>> <josiah at josiahritchie.com>
>> wrote:
>>
>> I just saw this Will. If you could get us into a technical school for
>> a meeting, that'd be a great relationship to start building and
>> probably provide more room than Ellis' house. Is that still an option?
>>
>> JSR/
>>
>> On Fri, Dec 2, 2011 at 8:54 AM, Will <staticphantom at gmail.com> wrote:
>>> Hmm... let me make some calls. Is anyone opposed to meeting in
>>> Bethlehem? I think I might be able to set up something for meeting up
>>> in the BAVTS. It's right next to Freedom High School.
>>>
>>> -Will
>>
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehi
>> ghvalley.com
>>
>>
>>
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehi
>> ghvalley.com
>>
>>
>
>
>
> --
>
> http://about.me/josiah
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com



From saxywolf at gmail.com  Tue Dec  6 23:44:16 2011
From: saxywolf at gmail.com (Ellis Farmer)
Date: Wed, 7 Dec 2011 00:44:16 -0500
Subject: [MakeLV] Alternate Dec8 meetup
In-Reply-To: <1323234397.18436.YahooMailNeo@web130202.mail.mud.yahoo.com>
References: <mailman.34.1323181975.14657.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
	<1323234397.18436.YahooMailNeo@web130202.mail.mud.yahoo.com>
Message-ID: <CAJeZOyEHNmwyLbznjphFskvye85PWuTBBRqmwEujcRTLE3FK9A@mail.gmail.com>

Actually I just found out I'll be working... writing 5 reports a day
through the weekend into early next week.  So, I'll miss yet another. :(

-Ellis
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111207/88f68cf2/attachment.htm>

From josiah at josiahritchie.com  Thu Dec  8 15:47:24 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Thu, 8 Dec 2011 16:47:24 -0500
Subject: [MakeLV] Tonight open hack
Message-ID: <CANyh6Vs14icNOO045HpjtcPxs61-MvhPWD6tj6jYdw1jqySjhQ@mail.gmail.com>

I'm not going to make it out tonight.  Jonas,  if your place is still
available,  please send out your address. As far as I know no one else
called any of the schools.  Correct me if something did come together.

JSR/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111208/8e24ba57/attachment.htm>

From tronwizard at yahoo.com  Thu Dec 15 11:43:18 2011
From: tronwizard at yahoo.com (Mr Thomas Rumpf)
Date: Thu, 15 Dec 2011 09:43:18 -0800 (PST)
Subject: [MakeLV] Dec 15 tmg
In-Reply-To: <mailman.1.1323450003.2360.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
References: <mailman.1.1323450003.2360.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
Message-ID: <1323970998.44128.YahooMailNeo@web130204.mail.mud.yahoo.com>

I'm working under the assumption it will take place.

Had a thought, there is a list of things that get thrown out on a cyclical basis that I'd like to collect, to a point. So far I have two items.

Toothbrushes - re-purpose as cleaning tools.
For anyone who uses chemicals in their workshop, the metal cans they come in. - raw materials for tinplate work.

Can anyone think of any others?

Tom R.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111215/d73afa72/attachment.htm>

From mtuerk at allentownedc.com  Thu Dec 15 11:45:14 2011
From: mtuerk at allentownedc.com (Matthew Tuerk)
Date: Thu, 15 Dec 2011 12:45:14 -0500
Subject: [MakeLV] Dec 15 tmg
In-Reply-To: <1323970998.44128.YahooMailNeo@web130204.mail.mud.yahoo.com>
References: <mailman.1.1323450003.2360.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
	<1323970998.44128.YahooMailNeo@web130204.mail.mud.yahoo.com>
Message-ID: <9D1C6581-2E0E-4328-90BE-AE551ECC2C0D@allentownedc.com>

We are definitely on for tonight. I may have to duck out for a few minutes midstream, but I will be there.
Matthew Tuerk

Assistant Director
Allentown Economic Development Corporation
(610) 435-8890 (w)
(610) 653-3064 (c)
mtuerk at allentownedc.com

facebook.com/AllentownEDC

twitter.com/AllentownEDC

CONFIDENTIALITY NOTICE The information in this email may be confidential and/or privileged. This email is intended to be reviewed by only the individual or organization named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this email and its attachments, if any, or the information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system.




On Dec 15, 2011, at 12:43 PM, Mr Thomas Rumpf wrote:

> I'm working under the assumption it will take place.
> 
> Had a thought, there is a list of things that get thrown out on a cyclical basis that I'd like to collect, to a point. So far I have two items.
> 
> Toothbrushes - re-purpose as cleaning tools.
> For anyone who uses chemicals in their workshop, the metal cans they come in. - raw materials for tinplate work.
> 
> Can anyone think of any others?
> 
> Tom R.
> 
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111215/c4cad0d4/attachment.htm>

From josiah at josiahritchie.com  Thu Dec 15 12:42:22 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Thu, 15 Dec 2011 13:42:22 -0500
Subject: [MakeLV] Dec 15 tmg
In-Reply-To: <9D1C6581-2E0E-4328-90BE-AE551ECC2C0D@allentownedc.com>
References: <mailman.1.1323450003.2360.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
	<1323970998.44128.YahooMailNeo@web130204.mail.mud.yahoo.com>
	<9D1C6581-2E0E-4328-90BE-AE551ECC2C0D@allentownedc.com>
Message-ID: <CANyh6VtXXEwr+4-d-3uoKNAqw6kgnvf+ycwJGjYsMLNmaEox6Q@mail.gmail.com>

I'm planning on being there tonight.

JSR/

On Thu, Dec 15, 2011 at 12:45 PM, Matthew Tuerk <mtuerk at allentownedc.com> wrote:
> We are definitely on for tonight. I may have to duck out for a few minutes
> midstream, but I will be there.
>
> Matthew Tuerk
>
> Assistant Director
> Allentown Economic Development Corporation
> (610) 435-8890 (w)
> (610) 653-3064 (c)
> mtuerk at allentownedc.com
>
> facebook.com/AllentownEDC
>
> twitter.com/AllentownEDC
>
> CONFIDENTIALITY NOTICE The information in this email may be confidential
> and/or privileged. This email is intended to be reviewed by only the
> individual or organization named above. If you are not the intended
> recipient or an authorized representative of the intended recipient, you are
> hereby notified that any review, dissemination or copying of this email and
> its attachments, if any, or the information contained herein is prohibited.
> If you have received this email in error, please immediately notify the
> sender by return email and delete this email from your system.
>
>
>
>
> On Dec 15, 2011, at 12:43 PM, Mr Thomas Rumpf wrote:
>
> I'm working under the assumption it will take place.
>
> Had a thought, there is a list of things that get thrown out on a cyclical
> basis that I'd like to collect, to a point. So far I have two items.
>
> Toothbrushes - re-purpose as cleaning tools.
> For anyone who uses chemicals in their workshop, the metal cans they come
> in. - raw materials for tinplate work.
>
> Can anyone think of any others?
>
> Tom R.
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>



-- 

http://about.me/josiah



From scott.piccotti at gmail.com  Thu Dec 15 13:06:23 2011
From: scott.piccotti at gmail.com (Scott Piccotti)
Date: Thu, 15 Dec 2011 14:06:23 -0500
Subject: [MakeLV] Dec 15 tmg
In-Reply-To: <CANyh6VtXXEwr+4-d-3uoKNAqw6kgnvf+ycwJGjYsMLNmaEox6Q@mail.gmail.com>
References: <mailman.1.1323450003.2360.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
	<1323970998.44128.YahooMailNeo@web130204.mail.mud.yahoo.com>
	<9D1C6581-2E0E-4328-90BE-AE551ECC2C0D@allentownedc.com>
	<CANyh6VtXXEwr+4-d-3uoKNAqw6kgnvf+ycwJGjYsMLNmaEox6Q@mail.gmail.com>
Message-ID: <8EF277D7-09F0-4DCD-8F65-EF3661EBDE34@gmail.com>

Can't make it tonight, we're driving up to visit my wife's family in MA tomorrow. Hopefully I'll have a little more time to spend on some of my noisemaker projects after the holidays...

  -scott


From josiah at josiahritchie.com  Thu Dec 15 13:34:04 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Thu, 15 Dec 2011 14:34:04 -0500
Subject: [MakeLV] Dec 15 tmg
In-Reply-To: <8EF277D7-09F0-4DCD-8F65-EF3661EBDE34@gmail.com>
References: <mailman.1.1323450003.2360.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
	<1323970998.44128.YahooMailNeo@web130204.mail.mud.yahoo.com>
	<9D1C6581-2E0E-4328-90BE-AE551ECC2C0D@allentownedc.com>
	<CANyh6VtXXEwr+4-d-3uoKNAqw6kgnvf+ycwJGjYsMLNmaEox6Q@mail.gmail.com>
	<8EF277D7-09F0-4DCD-8F65-EF3661EBDE34@gmail.com>
Message-ID: <CANyh6VsrDR-SA976AkyHZ=yU+NRyzqDa1xjGNpMc_sy_FBC3Rw@mail.gmail.com>

Have fun up North!

On Thu, Dec 15, 2011 at 2:06 PM, Scott Piccotti
<scott.piccotti at gmail.com> wrote:
> Can't make it tonight, we're driving up to visit my wife's family in MA tomorrow. Hopefully I'll have a little more time to spend on some of my noisemaker projects after the holidays...
>
> ?-scott



From tsworman at novaslp.net  Thu Dec 15 13:41:18 2011
From: tsworman at novaslp.net (Tyler Worman)
Date: Thu, 15 Dec 2011 14:41:18 -0500
Subject: [MakeLV] CNC/Laser cutting offer
Message-ID: <CADx1+C-H_3gW5s99+2q6ckt8Xofcqb7D3X2F7T5TztOXqzrc3g@mail.gmail.com>

I'm headed back to PA a few times in the next 2 weeks. If anyone needs
something laser cut or routed on a CNC machine, let me know. I'll run your
design (to the best of my ability) on AllHandsActive's equipment and bring
the pieces back with me. You pay for material, but otherwise no cost to you.

Laser cutter has an ~8.5"x~11" cutting area.
CNC has ~12"x~17"x~2"

Our CNC can route PCBs. Fine detail work is not possible right now. If you
have large traces with wide spacing, it should be okay. Our present spindle
has a run-out issue and makes a mess of a fine pitch board.

If you need something bigger, TechShop Detroit and i3Detroit have much
larger setups. I'm not sure I'll be able to get it done in time but we can
discuss.

   - Tyler
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111215/ad2e8c32/attachment.htm>

From josiah at josiahritchie.com  Thu Dec 15 14:57:05 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Thu, 15 Dec 2011 15:57:05 -0500
Subject: [MakeLV] CNC/Laser cutting offer
In-Reply-To: <CADx1+C-H_3gW5s99+2q6ckt8Xofcqb7D3X2F7T5TztOXqzrc3g@mail.gmail.com>
References: <CADx1+C-H_3gW5s99+2q6ckt8Xofcqb7D3X2F7T5TztOXqzrc3g@mail.gmail.com>
Message-ID: <CANyh6Vv1grcc+B=SDp4ELD7Dw6inmitr4PLcfGLdwg4BaPy+NA@mail.gmail.com>

Oh, that's a cool offer. Thanks Tyler! I'm not coming up with anything
personal right away that I could get together in a reasonable time,
but I wonder if we could get a design together to cut out a hive 4a
logo or something to hang in the space.

What sort of format do these files have to be in?

JSR/

On Thu, Dec 15, 2011 at 2:41 PM, Tyler Worman <tsworman at novaslp.net> wrote:
> I'm headed back to PA a few times in the next 2 weeks. If anyone needs
> something laser cut or routed on a CNC machine, let me know. I'll run your
> design (to the best of my ability) on AllHandsActive's equipment and bring
> the pieces back with me. You pay for material, but otherwise no cost to you.
>
> Laser cutter has an ~8.5"x~11" cutting area.
> CNC has ~12"x~17"x~2"
>
> Our CNC can route PCBs. Fine detail work is not possible right now. If you
> have large traces with wide spacing, it should be okay. Our present spindle
> has a run-out issue and makes a mess of a fine pitch board.
>
> If you need something bigger, TechShop Detroit and i3Detroit have much
> larger setups. I'm not sure I'll be able to get it done in time but we can
> discuss.
>
> ? ?- Tyler
>
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>



-- 

http://about.me/josiah



From tsworman at novaslp.net  Thu Dec 15 15:08:59 2011
From: tsworman at novaslp.net (Tyler Worman)
Date: Thu, 15 Dec 2011 16:08:59 -0500
Subject: [MakeLV] CNC/Laser cutting offer
In-Reply-To: <CANyh6Vv1grcc+B=SDp4ELD7Dw6inmitr4PLcfGLdwg4BaPy+NA@mail.gmail.com>
References: <CADx1+C-H_3gW5s99+2q6ckt8Xofcqb7D3X2F7T5TztOXqzrc3g@mail.gmail.com>
	<CANyh6Vv1grcc+B=SDp4ELD7Dw6inmitr4PLcfGLdwg4BaPy+NA@mail.gmail.com>
Message-ID: <CADx1+C-ujEEhxqVbyr8GmGQVpBZ6C-=_fczOsu9Oy=ULH3_=ZQ@mail.gmail.com>

PNG or DXF (I think!) for the laser cutter. It will do a vector or raster
cut. If the image is something else, I need to convert it.

CNC machine has a lot more options.
1) You generate the GCODE for a 3axis machine in MM (Metric!)
2) Create a file with the tool paths you want in Vectric VCarve Pro (Demo)
and I'll generate the GCode with our full version for a Mach3 driven
Machine.
3) Generate a JPEG/PNG/ or Bitmap without transparency and explain what you
want cut out. I'll generate the toolpaths based on your description and
send you some sample screenshots generated by VCarve.before I attempt to
cut it.

I have a 3D Cam program available called Vectric Cut3D but we haven't done
anything with it yet, so I'd prefer to steer clear of 3D stuff for now
until we play with it.

We could definitely run lettering or a logo for you on the CNC machine. If
you want it to be large, break it up into parts that I can cut and you can
re-assemble. You would just need to sand and finish it then.

How is the projector project going? Any progress on it?

     - Tyler

On Thu, Dec 15, 2011 at 3:57 PM, Josiah Ritchie <josiah at josiahritchie.com>wrote:

> Oh, that's a cool offer. Thanks Tyler! I'm not coming up with anything
> personal right away that I could get together in a reasonable time,
> but I wonder if we could get a design together to cut out a hive 4a
> logo or something to hang in the space.
>
> What sort of format do these files have to be in?
>
> JSR/
>
> On Thu, Dec 15, 2011 at 2:41 PM, Tyler Worman <tsworman at novaslp.net>
> wrote:
> > I'm headed back to PA a few times in the next 2 weeks. If anyone needs
> > something laser cut or routed on a CNC machine, let me know. I'll run
> your
> > design (to the best of my ability) on AllHandsActive's equipment and
> bring
> > the pieces back with me. You pay for material, but otherwise no cost to
> you.
> >
> > Laser cutter has an ~8.5"x~11" cutting area.
> > CNC has ~12"x~17"x~2"
> >
> > Our CNC can route PCBs. Fine detail work is not possible right now. If
> you
> > have large traces with wide spacing, it should be okay. Our present
> spindle
> > has a run-out issue and makes a mess of a fine pitch board.
> >
> > If you need something bigger, TechShop Detroit and i3Detroit have much
> > larger setups. I'm not sure I'll be able to get it done in time but we
> can
> > discuss.
> >
> >    - Tyler
> >
> >
> >
> > _______________________________________________
> > Makelehighvalley mailing list
> > Makelehighvalley at makelehighvalley.com
> >
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
> >
>
>
>
> --
>
> http://about.me/josiah
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111215/eef98b92/attachment.htm>

From itchyd at gmail.com  Thu Dec 15 17:37:39 2011
From: itchyd at gmail.com (Eric ItchyD)
Date: Thu, 15 Dec 2011 18:37:39 -0500
Subject: [MakeLV] CNC/Laser cutting offer
In-Reply-To: <CADx1+C-H_3gW5s99+2q6ckt8Xofcqb7D3X2F7T5TztOXqzrc3g@mail.gmail.com>
References: <CADx1+C-H_3gW5s99+2q6ckt8Xofcqb7D3X2F7T5TztOXqzrc3g@mail.gmail.com>
Message-ID: <CAHRp0+Ku+9xVp8LyH9CAt6H_sHPrAnK9um2=Vs1y2EKXZx3_mg@mail.gmail.com>

Here's a thing I designed which I kind of want to get made:
http://www.thingiverse.com/thing:14633

Right now it's thick and chunky, if you can make it for me I would probably
thin it down first. If you think you can get it to me before christmas
maybe I'd write my wife's name on it. Any guess how much to get it made out
of plastic? Any design tips?

Thanks!
Eric

On Thu, Dec 15, 2011 at 2:41 PM, Tyler Worman <tsworman at novaslp.net> wrote:

> I'm headed back to PA a few times in the next 2 weeks. If anyone needs
> something laser cut or routed on a CNC machine, let me know. I'll run your
> design (to the best of my ability) on AllHandsActive's equipment and bring
> the pieces back with me. You pay for material, but otherwise no cost to you.
>
> Laser cutter has an ~8.5"x~11" cutting area.
> CNC has ~12"x~17"x~2"
>
> Our CNC can route PCBs. Fine detail work is not possible right now. If you
> have large traces with wide spacing, it should be okay. Our present spindle
> has a run-out issue and makes a mess of a fine pitch board.
>
> If you need something bigger, TechShop Detroit and i3Detroit have much
> larger setups. I'm not sure I'll be able to get it done in time but we can
> discuss.
>
>    - Tyler
>
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111215/23649023/attachment.htm>

From tsworman at novaslp.net  Thu Dec 15 19:57:27 2011
From: tsworman at novaslp.net (Tyler Worman)
Date: Thu, 15 Dec 2011 20:57:27 -0500
Subject: [MakeLV] CNC/Laser cutting offer
In-Reply-To: <CAHRp0+Ku+9xVp8LyH9CAt6H_sHPrAnK9um2=Vs1y2EKXZx3_mg@mail.gmail.com>
References: <CADx1+C-H_3gW5s99+2q6ckt8Xofcqb7D3X2F7T5TztOXqzrc3g@mail.gmail.com>
	<CAHRp0+Ku+9xVp8LyH9CAt6H_sHPrAnK9um2=Vs1y2EKXZx3_mg@mail.gmail.com>
Message-ID: <CADx1+C-68VCzGCMcF6E8Jv9dGt117_UYmtEUmV9JKXaainF2Xg@mail.gmail.com>

I'll check if I can get buy the plastic from one of UM's engineering
departments. I'm not sure where else I would source a bit block of that. If
that doesn't work I could slice it and make it out of multiple pieces of
acrylic on the laser cutter which you then attach.

3rd option would be to print it on one of our printers but someone with a
Thingomatic could probably do that better than we could. Our stepper motor
driven printer has been on the fritz.

   - Tyler

On Thu, Dec 15, 2011 at 6:37 PM, Eric ItchyD <itchyd at gmail.com> wrote:

> Here's a thing I designed which I kind of want to get made:
> http://www.thingiverse.com/thing:14633
>
> Right now it's thick and chunky, if you can make it for me I would
> probably thin it down first. If you think you can get it to me before
> christmas maybe I'd write my wife's name on it. Any guess how much to get
> it made out of plastic? Any design tips?
>
> Thanks!
> Eric
>
> On Thu, Dec 15, 2011 at 2:41 PM, Tyler Worman <tsworman at novaslp.net>wrote:
>
>> I'm headed back to PA a few times in the next 2 weeks. If anyone needs
>> something laser cut or routed on a CNC machine, let me know. I'll run your
>> design (to the best of my ability) on AllHandsActive's equipment and bring
>> the pieces back with me. You pay for material, but otherwise no cost to you.
>>
>> Laser cutter has an ~8.5"x~11" cutting area.
>> CNC has ~12"x~17"x~2"
>>
>> Our CNC can route PCBs. Fine detail work is not possible right now. If
>> you have large traces with wide spacing, it should be okay. Our present
>> spindle has a run-out issue and makes a mess of a fine pitch board.
>>
>> If you need something bigger, TechShop Detroit and i3Detroit have much
>> larger setups. I'm not sure I'll be able to get it done in time but we can
>> discuss.
>>
>>    - Tyler
>>
>>
>>
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>>
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>
>>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111215/236e1386/attachment.htm>

From josiah at josiahritchie.com  Thu Dec 15 21:48:15 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Thu, 15 Dec 2011 22:48:15 -0500
Subject: [MakeLV] CNC/Laser cutting offer
In-Reply-To: <CADx1+C-68VCzGCMcF6E8Jv9dGt117_UYmtEUmV9JKXaainF2Xg@mail.gmail.com>
References: <CADx1+C-H_3gW5s99+2q6ckt8Xofcqb7D3X2F7T5TztOXqzrc3g@mail.gmail.com>
	<CAHRp0+Ku+9xVp8LyH9CAt6H_sHPrAnK9um2=Vs1y2EKXZx3_mg@mail.gmail.com>
	<CADx1+C-68VCzGCMcF6E8Jv9dGt117_UYmtEUmV9JKXaainF2Xg@mail.gmail.com>
Message-ID: <CANyh6VvAYKV7eZE7Yz8ktQhE7_20jMrafqtO8pNR7yS_Cmmsrg@mail.gmail.com>

We have a couple 3D printers. Dave Smith has a Thing-O-Matic and another
guy offered another higher-end printer service. His email came out to the
list so it'd be in the archives. That does look like a nice little thing to
get printed and local may be the best bet for pre-Christmas.

JSR/

On Thu, Dec 15, 2011 at 8:57 PM, Tyler Worman <tsworman at novaslp.net> wrote:

> I'll check if I can get buy the plastic from one of UM's engineering
> departments. I'm not sure where else I would source a bit block of that. If
> that doesn't work I could slice it and make it out of multiple pieces of
> acrylic on the laser cutter which you then attach.
>
> 3rd option would be to print it on one of our printers but someone with a
> Thingomatic could probably do that better than we could. Our stepper motor
> driven printer has been on the fritz.
>
>    - Tyler
>
>
> On Thu, Dec 15, 2011 at 6:37 PM, Eric ItchyD <itchyd at gmail.com> wrote:
>
>> Here's a thing I designed which I kind of want to get made:
>> http://www.thingiverse.com/thing:14633
>>
>> Right now it's thick and chunky, if you can make it for me I would
>> probably thin it down first. If you think you can get it to me before
>> christmas maybe I'd write my wife's name on it. Any guess how much to get
>> it made out of plastic? Any design tips?
>>
>> Thanks!
>> Eric
>>
>> On Thu, Dec 15, 2011 at 2:41 PM, Tyler Worman <tsworman at novaslp.net>wrote:
>>
>>> I'm headed back to PA a few times in the next 2 weeks. If anyone needs
>>> something laser cut or routed on a CNC machine, let me know. I'll run your
>>> design (to the best of my ability) on AllHandsActive's equipment and bring
>>> the pieces back with me. You pay for material, but otherwise no cost to you.
>>>
>>> Laser cutter has an ~8.5"x~11" cutting area.
>>> CNC has ~12"x~17"x~2"
>>>
>>> Our CNC can route PCBs. Fine detail work is not possible right now. If
>>> you have large traces with wide spacing, it should be okay. Our present
>>> spindle has a run-out issue and makes a mess of a fine pitch board.
>>>
>>> If you need something bigger, TechShop Detroit and i3Detroit have much
>>> larger setups. I'm not sure I'll be able to get it done in time but we can
>>> discuss.
>>>
>>>    - Tyler
>>>
>>>
>>>
>>> _______________________________________________
>>> Makelehighvalley mailing list
>>> Makelehighvalley at makelehighvalley.com
>>>
>>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>>
>>>
>>
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>>
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>
>>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>


-- 

http://about.me/josiah
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111215/613f13f4/attachment.htm>

From itchyd at gmail.com  Thu Dec 15 22:40:50 2011
From: itchyd at gmail.com (Eric ItchyD)
Date: Thu, 15 Dec 2011 23:40:50 -0500
Subject: [MakeLV] CNC/Laser cutting offer
In-Reply-To: <CANyh6VvAYKV7eZE7Yz8ktQhE7_20jMrafqtO8pNR7yS_Cmmsrg@mail.gmail.com>
References: <CADx1+C-H_3gW5s99+2q6ckt8Xofcqb7D3X2F7T5TztOXqzrc3g@mail.gmail.com>
	<CAHRp0+Ku+9xVp8LyH9CAt6H_sHPrAnK9um2=Vs1y2EKXZx3_mg@mail.gmail.com>
	<CADx1+C-68VCzGCMcF6E8Jv9dGt117_UYmtEUmV9JKXaainF2Xg@mail.gmail.com>
	<CANyh6VvAYKV7eZE7Yz8ktQhE7_20jMrafqtO8pNR7yS_Cmmsrg@mail.gmail.com>
Message-ID: <CAHRp0+LyHtNTypgY8JkH_WGkSNNJ6ZzKaGS9CETMP0HNbM0BZw@mail.gmail.com>

If Tyler can't do it for some reason I'll check around.  I'll rework it for
her tomorrow night and hopefully have a final design up soon.

On Thu, Dec 15, 2011 at 10:48 PM, Josiah Ritchie
<josiah at josiahritchie.com>wrote:

> We have a couple 3D printers. Dave Smith has a Thing-O-Matic and another
> guy offered another higher-end printer service. His email came out to the
> list so it'd be in the archives. That does look like a nice little thing to
> get printed and local may be the best bet for pre-Christmas.
>
> JSR/
>
>
> On Thu, Dec 15, 2011 at 8:57 PM, Tyler Worman <tsworman at novaslp.net>wrote:
>
>> I'll check if I can get buy the plastic from one of UM's engineering
>> departments. I'm not sure where else I would source a bit block of that. If
>> that doesn't work I could slice it and make it out of multiple pieces of
>> acrylic on the laser cutter which you then attach.
>>
>> 3rd option would be to print it on one of our printers but someone with a
>> Thingomatic could probably do that better than we could. Our stepper motor
>> driven printer has been on the fritz.
>>
>>    - Tyler
>>
>>
>> On Thu, Dec 15, 2011 at 6:37 PM, Eric ItchyD <itchyd at gmail.com> wrote:
>>
>>> Here's a thing I designed which I kind of want to get made:
>>> http://www.thingiverse.com/thing:14633
>>>
>>> Right now it's thick and chunky, if you can make it for me I would
>>> probably thin it down first. If you think you can get it to me before
>>> christmas maybe I'd write my wife's name on it. Any guess how much to get
>>> it made out of plastic? Any design tips?
>>>
>>> Thanks!
>>> Eric
>>>
>>> On Thu, Dec 15, 2011 at 2:41 PM, Tyler Worman <tsworman at novaslp.net>wrote:
>>>
>>>> I'm headed back to PA a few times in the next 2 weeks. If anyone needs
>>>> something laser cut or routed on a CNC machine, let me know. I'll run your
>>>> design (to the best of my ability) on AllHandsActive's equipment and bring
>>>> the pieces back with me. You pay for material, but otherwise no cost to you.
>>>>
>>>> Laser cutter has an ~8.5"x~11" cutting area.
>>>> CNC has ~12"x~17"x~2"
>>>>
>>>> Our CNC can route PCBs. Fine detail work is not possible right now. If
>>>> you have large traces with wide spacing, it should be okay. Our present
>>>> spindle has a run-out issue and makes a mess of a fine pitch board.
>>>>
>>>> If you need something bigger, TechShop Detroit and i3Detroit have much
>>>> larger setups. I'm not sure I'll be able to get it done in time but we can
>>>> discuss.
>>>>
>>>>    - Tyler
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Makelehighvalley mailing list
>>>> Makelehighvalley at makelehighvalley.com
>>>>
>>>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Makelehighvalley mailing list
>>> Makelehighvalley at makelehighvalley.com
>>>
>>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>>
>>>
>>
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>>
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>
>>
>
>
> --
>
> http://about.me/josiah
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111215/5457bf89/attachment.htm>

From itchyd at gmail.com  Thu Dec 15 22:41:38 2011
From: itchyd at gmail.com (Eric ItchyD)
Date: Thu, 15 Dec 2011 23:41:38 -0500
Subject: [MakeLV] CNC/Laser cutting offer
In-Reply-To: <CANyh6VvAYKV7eZE7Yz8ktQhE7_20jMrafqtO8pNR7yS_Cmmsrg@mail.gmail.com>
References: <CADx1+C-H_3gW5s99+2q6ckt8Xofcqb7D3X2F7T5TztOXqzrc3g@mail.gmail.com>
	<CAHRp0+Ku+9xVp8LyH9CAt6H_sHPrAnK9um2=Vs1y2EKXZx3_mg@mail.gmail.com>
	<CADx1+C-68VCzGCMcF6E8Jv9dGt117_UYmtEUmV9JKXaainF2Xg@mail.gmail.com>
	<CANyh6VvAYKV7eZE7Yz8ktQhE7_20jMrafqtO8pNR7yS_Cmmsrg@mail.gmail.com>
Message-ID: <CAHRp0+JhhyDNig03XR-BgzREnu5k9NEZKn6Uaxz-QKjxVqAOzA@mail.gmail.com>

If Tyler can't do it for some reason I'll check around.  I'll rework it for
tomorrow night and hopefully have a final design up soon. :)

On Thu, Dec 15, 2011 at 10:48 PM, Josiah Ritchie
<josiah at josiahritchie.com>wrote:

> We have a couple 3D printers. Dave Smith has a Thing-O-Matic and another
> guy offered another higher-end printer service. His email came out to the
> list so it'd be in the archives. That does look like a nice little thing to
> get printed and local may be the best bet for pre-Christmas.
>
> JSR/
>
>
> On Thu, Dec 15, 2011 at 8:57 PM, Tyler Worman <tsworman at novaslp.net>wrote:
>
>> I'll check if I can get buy the plastic from one of UM's engineering
>> departments. I'm not sure where else I would source a bit block of that. If
>> that doesn't work I could slice it and make it out of multiple pieces of
>> acrylic on the laser cutter which you then attach.
>>
>> 3rd option would be to print it on one of our printers but someone with a
>> Thingomatic could probably do that better than we could. Our stepper motor
>> driven printer has been on the fritz.
>>
>>    - Tyler
>>
>>
>> On Thu, Dec 15, 2011 at 6:37 PM, Eric ItchyD <itchyd at gmail.com> wrote:
>>
>>> Here's a thing I designed which I kind of want to get made:
>>> http://www.thingiverse.com/thing:14633
>>>
>>> Right now it's thick and chunky, if you can make it for me I would
>>> probably thin it down first. If you think you can get it to me before
>>> christmas maybe I'd write my wife's name on it. Any guess how much to get
>>> it made out of plastic? Any design tips?
>>>
>>> Thanks!
>>> Eric
>>>
>>> On Thu, Dec 15, 2011 at 2:41 PM, Tyler Worman <tsworman at novaslp.net>wrote:
>>>
>>>> I'm headed back to PA a few times in the next 2 weeks. If anyone needs
>>>> something laser cut or routed on a CNC machine, let me know. I'll run your
>>>> design (to the best of my ability) on AllHandsActive's equipment and bring
>>>> the pieces back with me. You pay for material, but otherwise no cost to you.
>>>>
>>>> Laser cutter has an ~8.5"x~11" cutting area.
>>>> CNC has ~12"x~17"x~2"
>>>>
>>>> Our CNC can route PCBs. Fine detail work is not possible right now. If
>>>> you have large traces with wide spacing, it should be okay. Our present
>>>> spindle has a run-out issue and makes a mess of a fine pitch board.
>>>>
>>>> If you need something bigger, TechShop Detroit and i3Detroit have much
>>>> larger setups. I'm not sure I'll be able to get it done in time but we can
>>>> discuss.
>>>>
>>>>    - Tyler
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Makelehighvalley mailing list
>>>> Makelehighvalley at makelehighvalley.com
>>>>
>>>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Makelehighvalley mailing list
>>> Makelehighvalley at makelehighvalley.com
>>>
>>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>>
>>>
>>
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>>
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>
>>
>
>
> --
>
> http://about.me/josiah
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111215/3069c632/attachment.htm>

From james at buildatron.com  Fri Dec 16 00:19:22 2011
From: james at buildatron.com (James Wolff)
Date: Fri, 16 Dec 2011 01:19:22 -0500
Subject: [MakeLV] Hi! We are a new 3d printer company and we are interested
	in your hackerspace!
Message-ID: <CAOijKrZYG5bfbWHJj4fRU=880OpvwKwm0iUtZEhuJ8VhjqE4UA@mail.gmail.com>

Hi!
I am a Founder Director of Buildatron Systems and both myself and my
partners are heavily involved with Alpha One Labs a hacker space in
Brooklyn; we truly understand the culture and ambition of these fantastic
places and are looking to service and support spaces like yours! The reason
we are contacting your organization is to show you how the Buildatron 2 3D
Printer. Since our launch, we have gained a lot of recognition and acclaim
for our machine's functionality and design given it's affordable status. As
a result, we were just featured in a PC Magazine piece (front page today!
http://www.pcmag.com/) and we have been growing our community every day at
the Build Lab (Http://Lab.Buildatron.com <http://lab.buildatron.com/>) .

As for the Buildatron 2 quick stats, our Series 2 has a recommended build
area of 7x7x4.5in and a max fabrication volume of 8x8x5in. We offer two
packages for ownership a fully assembled machines start at $2,500.00 and
our partly assembled DIY kits are $1,600.00. We include software with the
fully assembled machine, and we have machined couplings, injection molded
gears, an internal spool system, and an excellent enclosure.

Our offerings represent the leading edge of technology and the bottom line
is that with our software control package and Buildatron 2's hardware we
are building a revolution in low cost 3D printers. We believe in the value
of rapid-prototyping technology and their applications for communities and
hacker spaces like yours.

I would appreciate a discussion about your needs in order to meet them most
completely and grow more successful together. If you need any more
information in addition to the content attached, feel free to contact me
directly at 917-806-9442.

Thank you for your time. My partners and I are looking forward to seeing
how Buildatron can get involved in your community!

Best Regards,
James Wolff

-- 

 FOUNDER / DIRECTOR

E: James at Buildatron.com
P:  917.806.9442
W: www.Buildatron.com <http://www.buildatron.com/>
T:  http://www.twitter.com/Buildatron
A: 37-56 80th Street #4C
     New York, New York 11372 USA


Confidentiality Note: The information in this electronic mail message may
be confidential and for use of only the named recipient. The information
may be protected by privilege, work product immunity or other applicable
law. If you are not the intended recipient the retention, dissemination,
distribution or copying of this e-mail message is strictly prohibited. If
you receive this e-mail message in error please notify us by e-mail at
Contact at Buildatron.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111216/5d96eda4/attachment.htm>

From david at davincisciencecenter.org  Fri Dec 16 12:54:16 2011
From: david at davincisciencecenter.org (David Smith)
Date: Fri, 16 Dec 2011 13:54:16 -0500
Subject: [MakeLV] CNC/Laser cutting offer
In-Reply-To: <CANyh6VvAYKV7eZE7Yz8ktQhE7_20jMrafqtO8pNR7yS_Cmmsrg@mail.gmail.com>
References: <CADx1+C-H_3gW5s99+2q6ckt8Xofcqb7D3X2F7T5TztOXqzrc3g@mail.gmail.com>
	<CAHRp0+Ku+9xVp8LyH9CAt6H_sHPrAnK9um2=Vs1y2EKXZx3_mg@mail.gmail.com>
	<CADx1+C-68VCzGCMcF6E8Jv9dGt117_UYmtEUmV9JKXaainF2Xg@mail.gmail.com>
	<CANyh6VvAYKV7eZE7Yz8ktQhE7_20jMrafqtO8pNR7yS_Cmmsrg@mail.gmail.com>
Message-ID: <CAKY0pFTk1z7Z6iNHuW6BYb7SdPOfmudY0r6=pe+0G84bUihSyg@mail.gmail.com>

It's on my list to print already.  I'll let you know how it goes.

Dave



On Thu, Dec 15, 2011 at 10:48 PM, Josiah Ritchie
<josiah at josiahritchie.com>wrote:

> We have a couple 3D printers. Dave Smith has a Thing-O-Matic and another
> guy offered another higher-end printer service. His email came out to the
> list so it'd be in the archives. That does look like a nice little thing to
> get printed and local may be the best bet for pre-Christmas.
>
> JSR/
>
> On Thu, Dec 15, 2011 at 8:57 PM, Tyler Worman <tsworman at novaslp.net>wrote:
>
>> I'll check if I can get buy the plastic from one of UM's engineering
>> departments. I'm not sure where else I would source a bit block of that. If
>> that doesn't work I could slice it and make it out of multiple pieces of
>> acrylic on the laser cutter which you then attach.
>>
>> 3rd option would be to print it on one of our printers but someone with a
>> Thingomatic could probably do that better than we could. Our stepper motor
>> driven printer has been on the fritz.
>>
>>    - Tyler
>>
>>
>> On Thu, Dec 15, 2011 at 6:37 PM, Eric ItchyD <itchyd at gmail.com> wrote:
>>
>>> Here's a thing I designed which I kind of want to get made:
>>> http://www.thingiverse.com/thing:14633
>>>
>>> Right now it's thick and chunky, if you can make it for me I would
>>> probably thin it down first. If you think you can get it to me before
>>> christmas maybe I'd write my wife's name on it. Any guess how much to get
>>> it made out of plastic? Any design tips?
>>>
>>> Thanks!
>>> Eric
>>>
>>> On Thu, Dec 15, 2011 at 2:41 PM, Tyler Worman <tsworman at novaslp.net>wrote:
>>>
>>>> I'm headed back to PA a few times in the next 2 weeks. If anyone needs
>>>> something laser cut or routed on a CNC machine, let me know. I'll run your
>>>> design (to the best of my ability) on AllHandsActive's equipment and bring
>>>> the pieces back with me. You pay for material, but otherwise no cost to you.
>>>>
>>>> Laser cutter has an ~8.5"x~11" cutting area.
>>>> CNC has ~12"x~17"x~2"
>>>>
>>>> Our CNC can route PCBs. Fine detail work is not possible right now. If
>>>> you have large traces with wide spacing, it should be okay. Our present
>>>> spindle has a run-out issue and makes a mess of a fine pitch board.
>>>>
>>>> If you need something bigger, TechShop Detroit and i3Detroit have much
>>>> larger setups. I'm not sure I'll be able to get it done in time but we can
>>>> discuss.
>>>>
>>>>    - Tyler
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Makelehighvalley mailing list
>>>> Makelehighvalley at makelehighvalley.com
>>>>
>>>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Makelehighvalley mailing list
>>> Makelehighvalley at makelehighvalley.com
>>>
>>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>>
>>>
>>
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>>
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>
>>
>
>
> --
>
> http://about.me/josiah
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>


-- 
David L. Smith, Ph.D.
Director, Teacher Professional Development



3145 Hamilton Blvd Bypass
Allentown, PA 18103-3686
484-664-1002 x111
david at davincisciencecenter.org
http://www.davincisciencecenter.org


<http://www2.davincisciencecenter.org/wp-content/uploads/2011/04/Icons-for-E-Mail-Signature.png>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111216/fbb78ef0/attachment.htm>

From josiah at josiahritchie.com  Fri Dec 16 13:32:22 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Fri, 16 Dec 2011 14:32:22 -0500
Subject: [MakeLV] Hi! We are a new 3d printer company and we are
 interested in your hackerspace!
In-Reply-To: <CAOijKrZYG5bfbWHJj4fRU=880OpvwKwm0iUtZEhuJ8VhjqE4UA@mail.gmail.com>
References: <CAOijKrZYG5bfbWHJj4fRU=880OpvwKwm0iUtZEhuJ8VhjqE4UA@mail.gmail.com>
Message-ID: <CANyh6Vu9Qxen_DLqWLU7QnxBtxPhpXBEWtp4NLsCQhpQZpS-jg@mail.gmail.com>

Thanks James. I had a look at your website. If you make it down to the
Lehigh Valley some time, maybe we could have you come by the space to
demonstrate your printer.

I like the enclosure. It has a fun look. What advantages does it bring over
the MakerBot and the RepRap? I notice the price is higher than a MakerBot
so clearly you see some added value there. I'm curious what that is. I
appreciate that you don't directly compare yourself and in that I assume
you're trying not to put yourself in an adversarial role with that org
which is cool, but since I asked ... :-)

Is there an advantage to the shape of your enclosure or is it mostly an
aesthetic decision?

In terms of need, budget is a point of concern. We're trying to be as
accessible to the whole community as possible so that translates to keeping
our costs down. At this point we don't have money, a budget or anything.
This is made possible through the local economic development org providing
our space, with some limits that will be lifted as funds become available.
I think this more translates to maintenance than original cost. Raw
material and parts kept at a low price are probably something worth our
consideration. This is probably why professional equipment would be less
likely to show up than the various RepRap type models would show up.

JSR/

On Fri, Dec 16, 2011 at 1:19 AM, James Wolff <james at buildatron.com> wrote:

> Hi!
> I am a Founder Director of Buildatron Systems and both myself and my
> partners are heavily involved with Alpha One Labs a hacker space in
> Brooklyn; we truly understand the culture and ambition of these fantastic
> places and are looking to service and support spaces like yours! The reason
> we are contacting your organization is to show you how the Buildatron 2 3D
> Printer. Since our launch, we have gained a lot of recognition and acclaim
> for our machine's functionality and design given it's affordable status. As
> a result, we were just featured in a PC Magazine piece (front page today!
> http://www.pcmag.com/) and we have been growing our community every day
> at the Build Lab (Http://Lab.Buildatron.com <http://lab.buildatron.com/>)
> .
>
> As for the Buildatron 2 quick stats, our Series 2 has a recommended build
> area of 7x7x4.5in and a max fabrication volume of 8x8x5in. We offer two
> packages for ownership a fully assembled machines start at $2,500.00 and
> our partly assembled DIY kits are $1,600.00. We include software with the
> fully assembled machine, and we have machined couplings, injection molded
> gears, an internal spool system, and an excellent enclosure.
>
> Our offerings represent the leading edge of technology and the bottom line
> is that with our software control package and Buildatron 2's hardware we
> are building a revolution in low cost 3D printers. We believe in the value
> of rapid-prototyping technology and their applications for communities and
> hacker spaces like yours.
>
> I would appreciate a discussion about your needs in order to meet them
> most completely and grow more successful together. If you need any more
> information in addition to the content attached, feel free to contact me
> directly at 917-806-9442.
>
> Thank you for your time. My partners and I are looking forward to seeing
> how Buildatron can get involved in your community!
>
> Best Regards,
> James Wolff
>
> --
>
>  FOUNDER / DIRECTOR
>
> E: James at Buildatron.com
> P:  917.806.9442
> W: www.Buildatron.com <http://www.buildatron.com/>
> T:  http://www.twitter.com/Buildatron
>  A: 37-56 80th Street #4C
>      New York, New York 11372 USA
>
>
> Confidentiality Note: The information in this electronic mail message may
> be confidential and for use of only the named recipient. The information
> may be protected by privilege, work product immunity or other applicable
> law. If you are not the intended recipient the retention, dissemination,
> distribution or copying of this e-mail message is strictly prohibited. If
> you receive this e-mail message in error please notify us by e-mail at
> Contact at Buildatron.com
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>


-- 

http://about.me/josiah
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111216/eb1f2645/attachment.htm>

From mike at northeastlinuxfest.org  Sat Dec 17 15:52:50 2011
From: mike at northeastlinuxfest.org (mike at northeastlinuxfest.org)
Date: Sat, 17 Dec 2011 15:52:50 -0600
Subject: [MakeLV] Hackerspace Competition
Message-ID: <20111217155250.17227lexzvfk1r0g@www.northeastlinuxfest.org>

I have enclosed a poster of the event and there is a registration page  
at http//www.northeastlinuxfest.org. This event will have tv coverage  
AND the top three designs will be featured on WCCATV's tv magazine  
called "Soapbox". We will also be offering more prizes.  We look  
forward to seeing folks from your group, this is shaping up to be the  
most exciting part of the linuxfest!  Last item of interest, we are  
currently speaking with Make Magazine in hopes that they judge this  
hackerspace event! Any help with spreading the word on this event will  
be greatly appreciated.If you have any other questions please don't  
hesitate to contact me at mike at northeastlinuxfest.org.Thanks for your  
time.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: hackerspace_poster.odt
Type: application/vnd.oasis.opendocument.text
Size: 27019 bytes
Desc: not available
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111217/39121d3b/attachment.odt>

From whatever at taggers.org  Thu Dec 22 18:19:25 2011
From: whatever at taggers.org (whatever)
Date: Thu, 22 Dec 2011 19:19:25 -0500
Subject: [MakeLV] so no open hack tonight???
Message-ID: <4EF3C90D.3030709@taggers.org>

i was just there and the doors were locked and no lights on?



From saxywolf at gmail.com  Thu Dec 22 18:22:43 2011
From: saxywolf at gmail.com (Ellis Farmer)
Date: Thu, 22 Dec 2011 19:22:43 -0500
Subject: [MakeLV] so no open hack tonight???
In-Reply-To: <4EF3C90D.3030709@taggers.org>
References: <4EF3C90D.3030709@taggers.org>
Message-ID: <CAJeZOyEigYdW2fxVkSWPwJcotUE7+2Fb7cpAZW_03ZH6psYfFA@mail.gmail.com>

I think there is supposed to be... though once again I'm working late so i
can't make it.  I didn't even realize what time nor day it was.
-Ellis


On Thu, Dec 22, 2011 at 7:19 PM, whatever <whatever at taggers.org> wrote:

> i was just there and the doors were locked and no lights on?
>
> ______________________________**_________________
> Makelehighvalley mailing list
> Makelehighvalley@**makelehighvalley.com<Makelehighvalley at makelehighvalley.com>
> http://makelehighvalley.com/**mailman/listinfo/**makelehighvalley_**
> makelehighvalley.com<http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111222/df939bb3/attachment.htm>

From mtuerk at allentownedc.com  Thu Dec 22 18:29:54 2011
From: mtuerk at allentownedc.com (Matthew Tuerk)
Date: Thu, 22 Dec 2011 19:29:54 -0500
Subject: [MakeLV] so no open hack tonight???
In-Reply-To: <CAJeZOyEigYdW2fxVkSWPwJcotUE7+2Fb7cpAZW_03ZH6psYfFA@mail.gmail.com>
References: <4EF3C90D.3030709@taggers.org>
	<CAJeZOyEigYdW2fxVkSWPwJcotUE7+2Fb7cpAZW_03ZH6psYfFA@mail.gmail.com>
Message-ID: <79CDAA9A-270B-40A8-8B9A-702EE5C78A75@allentownedc.com>

Didn't see anyone by 7:15 so I figured nobody was coming. I will wait it out next Thursday. 

Matthew Tuerk
mtuerk at allentownedc.com
610 653-3064

Sent from my iPhone

On Dec 22, 2011, at 7:22 PM, Ellis Farmer <saxywolf at gmail.com> wrote:

> I think there is supposed to be... though once again I'm working late so i can't make it.  I didn't even realize what time nor day it was.
> -Ellis
> 
> 
> On Thu, Dec 22, 2011 at 7:19 PM, whatever <whatever at taggers.org> wrote:
> i was just there and the doors were locked and no lights on?
> 
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
> 
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111222/8f6499d6/attachment.htm>

From mtuerk at allentownedc.com  Thu Dec 22 18:37:31 2011
From: mtuerk at allentownedc.com (Matthew Tuerk)
Date: Thu, 22 Dec 2011 19:37:31 -0500
Subject: [MakeLV] so no open hack tonight???
In-Reply-To: <CAJeZOyEigYdW2fxVkSWPwJcotUE7+2Fb7cpAZW_03ZH6psYfFA@mail.gmail.com>
References: <4EF3C90D.3030709@taggers.org>
	<CAJeZOyEigYdW2fxVkSWPwJcotUE7+2Fb7cpAZW_03ZH6psYfFA@mail.gmail.com>
Message-ID: <E049AB2A-A62B-46F2-959D-7F2C956D603E@allentownedc.com>

Whoop! Tom, josh and Dave were waiting when I went out the door!

Hack on!

Matthew Tuerk
mtuerk at allentownedc.com
610 653-3064

Sent from my iPhone

On Dec 22, 2011, at 7:22 PM, Ellis Farmer <saxywolf at gmail.com> wrote:

> I think there is supposed to be... though once again I'm working late so i can't make it.  I didn't even realize what time nor day it was.
> -Ellis
> 
> 
> On Thu, Dec 22, 2011 at 7:19 PM, whatever <whatever at taggers.org> wrote:
> i was just there and the doors were locked and no lights on?
> 
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
> 
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111222/a1b90acd/attachment.htm>

From josiah at josiahritchie.com  Thu Dec 22 19:15:52 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Thu, 22 Dec 2011 20:15:52 -0500
Subject: [MakeLV] so no open hack tonight???
In-Reply-To: <CAJeZOyEigYdW2fxVkSWPwJcotUE7+2Fb7cpAZW_03ZH6psYfFA@mail.gmail.com>
References: <4EF3C90D.3030709@taggers.org>
	<CAJeZOyEigYdW2fxVkSWPwJcotUE7+2Fb7cpAZW_03ZH6psYfFA@mail.gmail.com>
Message-ID: <CANyh6Vvgmtegq=C5pbTRz+ae6S0GueXVzLwJWXZCiGf938AEpw@mail.gmail.com>

I'm sick, but I saw Hive4a's facebook page announcing it. Perhaps
Matthew was running a bit behind?

JSR/

On Thu, Dec 22, 2011 at 7:22 PM, Ellis Farmer <saxywolf at gmail.com> wrote:
> I think there is supposed to be... though once again I'm working late so i
> can't make it. ?I didn't even realize what time nor day it was.
> -Ellis
>
>
>
> On Thu, Dec 22, 2011 at 7:19 PM, whatever <whatever at taggers.org> wrote:
>>
>> i was just there and the doors were locked and no lights on?



From whatever at taggers.org  Thu Dec 22 21:35:29 2011
From: whatever at taggers.org (whatever)
Date: Thu, 22 Dec 2011 22:35:29 -0500
Subject: [MakeLV] so no open hack tonight???
In-Reply-To: <E049AB2A-A62B-46F2-959D-7F2C956D603E@allentownedc.com>
References: <4EF3C90D.3030709@taggers.org>
	<CAJeZOyEigYdW2fxVkSWPwJcotUE7+2Fb7cpAZW_03ZH6psYfFA@mail.gmail.com>
	<E049AB2A-A62B-46F2-959D-7F2C956D603E@allentownedc.com>
Message-ID: <4EF3F701.7040406@taggers.org>

doh... just got this.. on the plus side i got some chores done and some 
time to work on a different project.



From josiah at josiahritchie.com  Fri Dec 23 11:36:22 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Fri, 23 Dec 2011 12:36:22 -0500
Subject: [MakeLV] Cap going bad?
Message-ID: <CANyh6VteFfFOchktD-jc-YJto0w1j+AK51qJ2ALfKR5HZ=V3OA@mail.gmail.com>

I'm messing around with another old pc power supply and found that the top
of one of the 200v 330mF caps is giving 150v when connected to ground. Is
this normal? The other caps have no problems.

Yes, I discovered this through physical contact with the cap. My wife
thought a small animal was released in the room by the yelp I made. :-)

JSR/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111223/0b0e4fcc/attachment.htm>

From david at davincisciencecenter.org  Fri Dec 23 12:00:12 2011
From: david at davincisciencecenter.org (David Smith)
Date: Fri, 23 Dec 2011 13:00:12 -0500
Subject: [MakeLV] Cap going bad?
In-Reply-To: <CANyh6VteFfFOchktD-jc-YJto0w1j+AK51qJ2ALfKR5HZ=V3OA@mail.gmail.com>
References: <CANyh6VteFfFOchktD-jc-YJto0w1j+AK51qJ2ALfKR5HZ=V3OA@mail.gmail.com>
Message-ID: <CAKY0pFTScxBtn8UreO5x4WCWF+N72FDSsStDpiLWocNJwTjRuA@mail.gmail.com>

Doesn't sound right... Isn't the case supposed to be (-) or ground?

Dave

On Fri, Dec 23, 2011 at 12:36 PM, Josiah Ritchie
<josiah at josiahritchie.com>wrote:

> I'm messing around with another old pc power supply and found that the top
> of one of the 200v 330mF caps is giving 150v when connected to ground. Is
> this normal? The other caps have no problems.
>
> Yes, I discovered this through physical contact with the cap. My wife
> thought a small animal was released in the room by the yelp I made. :-)
>
> JSR/
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>


-- 
David L. Smith, Ph.D.
Director, Teacher Professional Development



3145 Hamilton Blvd Bypass
Allentown, PA 18103-3686
484-664-1002 x111
david at davincisciencecenter.org
http://www.davincisciencecenter.org


<http://www2.davincisciencecenter.org/wp-content/uploads/2011/04/Icons-for-E-Mail-Signature.png>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111223/4509d7b4/attachment.htm>

From staticphantom at gmail.com  Fri Dec 23 12:09:05 2011
From: staticphantom at gmail.com (Will)
Date: Fri, 23 Dec 2011 13:09:05 -0500
Subject: [MakeLV] Cap going bad?
In-Reply-To: <CAKY0pFTScxBtn8UreO5x4WCWF+N72FDSsStDpiLWocNJwTjRuA@mail.gmail.com>
References: <CANyh6VteFfFOchktD-jc-YJto0w1j+AK51qJ2ALfKR5HZ=V3OA@mail.gmail.com>
	<CAKY0pFTScxBtn8UreO5x4WCWF+N72FDSsStDpiLWocNJwTjRuA@mail.gmail.com>
Message-ID: <CAO8063UTLVOJ+sq-BhpmKDEh=KHJN=rT66P+et-BgckmcZkEqw@mail.gmail.com>

The cap is rated to 200V but will not operate at 200V unless the supply
operates at that voltage. It is customary practice to try and get cap
rating voltages 10% or higher above the operating voltage for safety and
reliability.

-Will

On Fri, Dec 23, 2011 at 1:00 PM, David Smith <david at davincisciencecenter.org
> wrote:

> Doesn't sound right... Isn't the case supposed to be (-) or ground?
>
> Dave
>
> On Fri, Dec 23, 2011 at 12:36 PM, Josiah Ritchie <josiah at josiahritchie.com
> > wrote:
>
>> I'm messing around with another old pc power supply and found that the
>> top of one of the 200v 330mF caps is giving 150v when connected to ground.
>> Is this normal? The other caps have no problems.
>>
>> Yes, I discovered this through physical contact with the cap. My wife
>> thought a small animal was released in the room by the yelp I made. :-)
>>
>> JSR/
>>
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>>
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>
>>
>
>
> --
> David L. Smith, Ph.D.
> Director, Teacher Professional Development
>
>
>
> 3145 Hamilton Blvd Bypass
> Allentown, PA 18103-3686
> 484-664-1002 x111
> david at davincisciencecenter.org
> http://www.davincisciencecenter.org
>
>
>
> <http://www2.davincisciencecenter.org/wp-content/uploads/2011/04/Icons-for-E-Mail-Signature.png>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111223/fd66fe89/attachment.htm>

From staticphantom at gmail.com  Fri Dec 23 12:16:00 2011
From: staticphantom at gmail.com (Will)
Date: Fri, 23 Dec 2011 13:16:00 -0500
Subject: [MakeLV] so no open hack tonight???
In-Reply-To: <4EF3F701.7040406@taggers.org>
References: <4EF3C90D.3030709@taggers.org>
	<CAJeZOyEigYdW2fxVkSWPwJcotUE7+2Fb7cpAZW_03ZH6psYfFA@mail.gmail.com>
	<E049AB2A-A62B-46F2-959D-7F2C956D603E@allentownedc.com>
	<4EF3F701.7040406@taggers.org>
Message-ID: <CAO8063WF_AcNBtY4jNJjqvcx1ja3y6nWHvtg=ww-6fP6f4Eegw@mail.gmail.com>

And of course... I was getting back from Chicago at 3:30 this morning
the night of an open hack.... Just figures Chicago has to ruin
someones open hack yet again.

-Will


On Thu, Dec 22, 2011 at 10:35 PM, whatever <whatever at taggers.org> wrote:
> doh... just got this.. on the plus side i got some chores done and some time
> to work on a different project.
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com



From josiah at josiahritchie.com  Fri Dec 23 12:19:00 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Fri, 23 Dec 2011 13:19:00 -0500
Subject: [MakeLV] Cap going bad?
In-Reply-To: <CAO8063UTLVOJ+sq-BhpmKDEh=KHJN=rT66P+et-BgckmcZkEqw@mail.gmail.com>
References: <CANyh6VteFfFOchktD-jc-YJto0w1j+AK51qJ2ALfKR5HZ=V3OA@mail.gmail.com>
	<CAKY0pFTScxBtn8UreO5x4WCWF+N72FDSsStDpiLWocNJwTjRuA@mail.gmail.com>
	<CAO8063UTLVOJ+sq-BhpmKDEh=KHJN=rT66P+et-BgckmcZkEqw@mail.gmail.com>
Message-ID: <CANyh6Vt-7Yh0CTeqh4Ze34fMb1mAV9OKu9bdaEhjPYWy0dpuPw@mail.gmail.com>

Yeah, but I'm not talking about the leads on the bottom. I'm talking about
the top.

JSR/
On Dec 23, 2011 1:09 PM, "Will" <staticphantom at gmail.com> wrote:

> The cap is rated to 200V but will not operate at 200V unless the supply
> operates at that voltage. It is customary practice to try and get cap
> rating voltages 10% or higher above the operating voltage for safety and
> reliability.
>
> -Will
>
> On Fri, Dec 23, 2011 at 1:00 PM, David Smith <
> david at davincisciencecenter.org> wrote:
>
>> Doesn't sound right... Isn't the case supposed to be (-) or ground?
>>
>> Dave
>>
>> On Fri, Dec 23, 2011 at 12:36 PM, Josiah Ritchie <
>> josiah at josiahritchie.com> wrote:
>>
>>> I'm messing around with another old pc power supply and found that the
>>> top of one of the 200v 330mF caps is giving 150v when connected to ground.
>>> Is this normal? The other caps have no problems.
>>>
>>> Yes, I discovered this through physical contact with the cap. My wife
>>> thought a small animal was released in the room by the yelp I made. :-)
>>>
>>> JSR/
>>>
>>> _______________________________________________
>>> Makelehighvalley mailing list
>>> Makelehighvalley at makelehighvalley.com
>>>
>>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>>
>>>
>>
>>
>> --
>> David L. Smith, Ph.D.
>> Director, Teacher Professional Development
>>
>>
>>
>> 3145 Hamilton Blvd Bypass
>> Allentown, PA 18103-3686
>> 484-664-1002 x111
>> david at davincisciencecenter.org
>> http://www.davincisciencecenter.org
>>
>>
>>
>> <http://www2.davincisciencecenter.org/wp-content/uploads/2011/04/Icons-for-E-Mail-Signature.png>
>>
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>>
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>
>>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111223/738debd5/attachment.htm>

From whatever at taggers.org  Fri Dec 23 13:17:17 2011
From: whatever at taggers.org (whatever)
Date: Fri, 23 Dec 2011 14:17:17 -0500
Subject: [MakeLV] Cap going bad?
In-Reply-To: <CANyh6Vt-7Yh0CTeqh4Ze34fMb1mAV9OKu9bdaEhjPYWy0dpuPw@mail.gmail.com>
References: <CANyh6VteFfFOchktD-jc-YJto0w1j+AK51qJ2ALfKR5HZ=V3OA@mail.gmail.com>
	<CAKY0pFTScxBtn8UreO5x4WCWF+N72FDSsStDpiLWocNJwTjRuA@mail.gmail.com>
	<CAO8063UTLVOJ+sq-BhpmKDEh=KHJN=rT66P+et-BgckmcZkEqw@mail.gmail.com>
	<CANyh6Vt-7Yh0CTeqh4Ze34fMb1mAV9OKu9bdaEhjPYWy0dpuPw@mail.gmail.com>
Message-ID: <4EF4D3BD.3030907@taggers.org>

your meter might have a cap setting, if not one of us at the space might.

On 12/23/2011 1:19 PM, Josiah Ritchie wrote:
>
> Yeah, but I'm not talking about the leads on the bottom. I'm talking 
> about the top.
>
> JSR/
>
> On Dec 23, 2011 1:09 PM, "Will" <staticphantom at gmail.com 
> <mailto:staticphantom at gmail.com>> wrote:
>
>     The cap is rated to 200V but will not operate at 200V unless the
>     supply operates at that voltage. It is customary practice to try
>     and get cap rating voltages 10% or higher above the operating
>     voltage for safety and reliability.
>
>     -Will
>
>     On Fri, Dec 23, 2011 at 1:00 PM, David Smith
>     <david at davincisciencecenter.org
>     <mailto:david at davincisciencecenter.org>> wrote:
>
>         Doesn't sound right... Isn't the case supposed to be (-) or
>         ground?
>
>         Dave
>
>         On Fri, Dec 23, 2011 at 12:36 PM, Josiah Ritchie
>         <josiah at josiahritchie.com <mailto:josiah at josiahritchie.com>>
>         wrote:
>
>             I'm messing around with another old pc power supply and
>             found that the top of one of the 200v 330mF caps is giving
>             150v when connected to ground. Is this normal? The other
>             caps have no problems.
>
>             Yes, I discovered this through physical contact with the
>             cap. My wife thought a small animal was released in the
>             room by the yelp I made. :-)
>
>             JSR/
>
>
>             _______________________________________________
>             Makelehighvalley mailing list
>             Makelehighvalley at makelehighvalley.com
>             <mailto:Makelehighvalley at makelehighvalley.com>
>             http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
>
>
>         -- 
>         David L. Smith, Ph.D.
>         Director, Teacher Professional Development
>
>
>
>         3145 Hamilton Blvd Bypass
>         Allentown, PA 18103-3686
>         484-664-1002 x111 <tel:484-664-1002%20x111>
>         david at davincisciencecenter.org
>         <mailto:david at davincisciencecenter.org>
>         http://www.davincisciencecenter.org
>
>
>
>
>         _______________________________________________
>         Makelehighvalley mailing list
>         Makelehighvalley at makelehighvalley.com
>         <mailto:Makelehighvalley at makelehighvalley.com>
>         http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
>
>     _______________________________________________
>     Makelehighvalley mailing list
>     Makelehighvalley at makelehighvalley.com
>     <mailto:Makelehighvalley at makelehighvalley.com>
>     http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111223/adfb873c/attachment.htm>

From josiah at josiahritchie.com  Fri Dec 23 13:33:01 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Fri, 23 Dec 2011 14:33:01 -0500
Subject: [MakeLV] Cap going bad?
In-Reply-To: <4EF4D3BD.3030907@taggers.org>
References: <CANyh6VteFfFOchktD-jc-YJto0w1j+AK51qJ2ALfKR5HZ=V3OA@mail.gmail.com>
	<CAKY0pFTScxBtn8UreO5x4WCWF+N72FDSsStDpiLWocNJwTjRuA@mail.gmail.com>
	<CAO8063UTLVOJ+sq-BhpmKDEh=KHJN=rT66P+et-BgckmcZkEqw@mail.gmail.com>
	<CANyh6Vt-7Yh0CTeqh4Ze34fMb1mAV9OKu9bdaEhjPYWy0dpuPw@mail.gmail.com>
	<4EF4D3BD.3030907@taggers.org>
Message-ID: <CANyh6Vub_-GQ-vVsrF0iyziM5096xbybx9BXuVOYMAWqsuWhUQ@mail.gmail.com>

Oh, nice.  Pretty sure mine doesn't. I'll have to watch for that.
JSR/
On Dec 23, 2011 2:17 PM, "whatever" <whatever at taggers.org> wrote:

>  your meter might have a cap setting, if not one of us at the space might.
>
> On 12/23/2011 1:19 PM, Josiah Ritchie wrote:
>
> Yeah, but I'm not talking about the leads on the bottom. I'm talking about
> the top.
>
> JSR/
> On Dec 23, 2011 1:09 PM, "Will" <staticphantom at gmail.com> wrote:
>
>> The cap is rated to 200V but will not operate at 200V unless the supply
>> operates at that voltage. It is customary practice to try and get cap
>> rating voltages 10% or higher above the operating voltage for safety and
>> reliability.
>>
>>  -Will
>>
>> On Fri, Dec 23, 2011 at 1:00 PM, David Smith <
>> david at davincisciencecenter.org> wrote:
>>
>>> Doesn't sound right... Isn't the case supposed to be (-) or ground?
>>>
>>> Dave
>>>
>>>  On Fri, Dec 23, 2011 at 12:36 PM, Josiah Ritchie <
>>> josiah at josiahritchie.com> wrote:
>>>
>>>>  I'm messing around with another old pc power supply and found that
>>>> the top of one of the 200v 330mF caps is giving 150v when connected to
>>>> ground. Is this normal? The other caps have no problems.
>>>>
>>>> Yes, I discovered this through physical contact with the cap. My wife
>>>> thought a small animal was released in the room by the yelp I made. :-)
>>>>
>>>> JSR/
>>>>
>>>>  _______________________________________________
>>>> Makelehighvalley mailing list
>>>> Makelehighvalley at makelehighvalley.com
>>>>
>>>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>>>
>>>>
>>>
>>>
>>> --
>>> David L. Smith, Ph.D.
>>> Director, Teacher Professional Development
>>>
>>>
>>>
>>> 3145 Hamilton Blvd Bypass
>>> Allentown, PA 18103-3686
>>> 484-664-1002 x111 <484-664-1002%20x111>
>>> david at davincisciencecenter.org
>>> http://www.davincisciencecenter.org
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Makelehighvalley mailing list
>>> Makelehighvalley at makelehighvalley.com
>>>
>>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>>
>>>
>>
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>>
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>
>>
>
> _______________________________________________
> Makelehighvalley mailing listMakelehighvalley at makelehighvalley.comhttp://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111223/ebb92856/attachment.htm>

From firehopper at gmail.com  Sat Dec 24 18:07:34 2011
From: firehopper at gmail.com (Keith Miller)
Date: Sat, 24 Dec 2011 19:07:34 -0500
Subject: [MakeLV] anyone have access to a vacuform machine? I need 4 - 1/2
	spheres, either marble or paintball size.
Message-ID: <498AB9977BF44CAEB3CF7801918C8A32@FirehopperPC>

or know where I could get such? its for a 1/4 scale spirit of St. Louis airplane my dad is building. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111224/564cafc4/attachment.htm>

From whatever at taggers.org  Sat Dec 24 21:40:45 2011
From: whatever at taggers.org (whatever)
Date: Sat, 24 Dec 2011 22:40:45 -0500
Subject: [MakeLV] anyone have access to a vacuform machine? I need 4 -
 1/2 spheres, either marble or paintball size.
In-Reply-To: <498AB9977BF44CAEB3CF7801918C8A32@FirehopperPC>
References: <498AB9977BF44CAEB3CF7801918C8A32@FirehopperPC>
Message-ID: <4EF69B3D.7030708@taggers.org>

http://www.kitkraft.biz/home.php?cat=229%22%3EThis something like this?



From firehopper at gmail.com  Sun Dec 25 05:15:08 2011
From: firehopper at gmail.com (Keith Miller)
Date: Sun, 25 Dec 2011 06:15:08 -0500
Subject: [MakeLV] anyone have access to a vacuform machine? I need 4 -
	1/2 spheres, either marble or paintball size.
In-Reply-To: <4EF69B3D.7030708@taggers.org>
References: <498AB9977BF44CAEB3CF7801918C8A32@FirehopperPC>
	<4EF69B3D.7030708@taggers.org>
Message-ID: <7E7C192810704F029FEA00B8EC41611F@FirehopperPC>

yes thanks, that?s exactly what I need


-----Original Message----- 
From: whatever
Sent: Saturday, December 24, 2011 10:40 PM
To: Build things for fun!
Subject: Re: [MakeLV] anyone have access to a vacuform machine? I need 4 - 
1/2 spheres, either marble or paintball size.

http://www.kitkraft.biz/home.php?cat=229%22%3EThis something like this?

_______________________________________________
Makelehighvalley mailing list
Makelehighvalley at makelehighvalley.com
http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com 




From joe at dunfee.com  Tue Dec 27 09:58:21 2011
From: joe at dunfee.com (Joe Dunfee)
Date: Tue, 27 Dec 2011 10:58:21 -0500
Subject: [MakeLV] anyone have access to a vacuform machine? I need 4 -
 1/2 spheres, either marble or paintball size. (whatever)
In-Reply-To: <mailman.1.1324832405.2628.makelehighvalley_makelehighvalle
	y.com@makelehighvalley.com>
References: <mailman.1.1324832405.2628.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
Message-ID: <mailman.9.1713536822.1257339.makelehighvalley_makelehighvalley.com@makelehighvalley.com>

I have a small hobby vacuum former that can handle 11x17" 
sheets.  The plastic is heated in your home oven, and a shop-vac used 
to provide the suction.  But, I live in the Lancaster area, and no 
work in York, so it will be rare for me to come up your 
way.  Although, I have to be in Allentown to attend a training class 
the last two weeks in January, and will try to pay a visit.

I have read about model airplane hobbyist and puppeteers using a 
technique to pull the heated plastic over a mold without a 
vacuum.  The plastic is held in a frame of some sort, by either 
clamping or even taping the plastic to it. The plastic is heated by 
holding it under a heat lamp until it sags a bit.  Then, pull the 
plastic over your positive mold.

If you need a totally smooth finish such as for a window,  there is a 
technique used in industry for making the plastic skylights. I 
adapted the technique when I needed a large egg shape for a hatching 
dinosaur puppet.  I cut an opening in a strong cardboard box in the 
profile of the egg. Then, cut another hole in the side for my 
shop-vac nozzle.  I think I simply taped the thin polyethylene foam I 
used to the box.  I don't recall how I heated it. I may have simply 
put the entire box in the oven to slowly soften the foam (foam takes 
a LONG time to heat since it tends to insulate the interior of the 
foam).  Of course, you have to be very careful to control your 
suction.  You must also hold that suction until the plastic cools. It 
was not as hard as it sounds, since the plastic is not totally limp, 
and the more it stretches the more it resists being stretched. A 
second smaller hole on the side of the box,  allows you to control 
the suction by how much you cover the hole with your hand.


Joe Dunfee  joe at dunfee.com
Gordonville, Pennsylvania, U.S.A. 




From firehopper at gmail.com  Tue Dec 27 11:56:01 2011
From: firehopper at gmail.com (Keith Miller)
Date: Tue, 27 Dec 2011 12:56:01 -0500
Subject: [MakeLV] anyone have access to a vacuform machine? I need 4 -
	1/2 spheres, either marble or paintball size. (whatever)
In-Reply-To: <4ef9eb2e.43bfec0a.20b0.398cSMTPIN_ADDED@mx.google.com>
References: <mailman.1.1324832405.2628.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
	<4ef9eb2e.43bfec0a.20b0.398cSMTPIN_ADDED@mx.google.com>
Message-ID: <A226F3FC29CD412687008BA7402D16E3@FirehopperPC>

basically all I need is 4 - 1/2 - 3/4 inch size hemispheres, they could be 
molded over glass marbles. and I could send you a MO or some money via 
paypal, the website I was linked to has a minimum order of 15, and I don?t 
need that many spheres, (nothing else in the store I want)

let me know :)


-----Original Message----- 
From: Joe Dunfee
Sent: Tuesday, December 27, 2011 10:58 AM
To: makelehighvalley at makelehighvalley.com
Subject: Re: [MakeLV] anyone have access to a vacuform machine? I need 4 - 
1/2 spheres, either marble or paintball size. (whatever)

I have a small hobby vacuum former that can handle 11x17"
sheets.  The plastic is heated in your home oven, and a shop-vac used
to provide the suction.  But, I live in the Lancaster area, and no
work in York, so it will be rare for me to come up your
way.  Although, I have to be in Allentown to attend a training class
the last two weeks in January, and will try to pay a visit.

I have read about model airplane hobbyist and puppeteers using a
technique to pull the heated plastic over a mold without a
vacuum.  The plastic is held in a frame of some sort, by either
clamping or even taping the plastic to it. The plastic is heated by
holding it under a heat lamp until it sags a bit.  Then, pull the
plastic over your positive mold.

If you need a totally smooth finish such as for a window,  there is a
technique used in industry for making the plastic skylights. I
adapted the technique when I needed a large egg shape for a hatching
dinosaur puppet.  I cut an opening in a strong cardboard box in the
profile of the egg. Then, cut another hole in the side for my
shop-vac nozzle.  I think I simply taped the thin polyethylene foam I
used to the box.  I don't recall how I heated it. I may have simply
put the entire box in the oven to slowly soften the foam (foam takes
a LONG time to heat since it tends to insulate the interior of the
foam).  Of course, you have to be very careful to control your
suction.  You must also hold that suction until the plastic cools. It
was not as hard as it sounds, since the plastic is not totally limp,
and the more it stretches the more it resists being stretched. A
second smaller hole on the side of the box,  allows you to control
the suction by how much you cover the hole with your hand.


Joe Dunfee  joe at dunfee.com
Gordonville, Pennsylvania, U.S.A.


_______________________________________________
Makelehighvalley mailing list
Makelehighvalley at makelehighvalley.com
http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com 




From tronwizard at yahoo.com  Tue Dec 27 12:46:57 2011
From: tronwizard at yahoo.com (Mr Thomas Rumpf)
Date: Tue, 27 Dec 2011 10:46:57 -0800 (PST)
Subject: [MakeLV] Makelehighvalley Digest, Vol 14, Issue 14
In-Reply-To: <mailman.1.1324667852.25038.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
References: <mailman.1.1324667852.25038.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
Message-ID: <1325011617.13566.YahooMailNeo@web130203.mail.mud.yahoo.com>





________________________________
 Message: 1
Date: Fri, 23 Dec 2011 12:36:22 -0500
From: Josiah Ritchie <josiah at josiahritchie.com>
To: makelehighvalley <makelehighvalley at makelehighvalley.com>
Subject: [MakeLV] Cap going bad?
Message-ID:
??? <CANyh6VteFfFOchktD-jc-YJto0w1j+AK51qJ2ALfKR5HZ=V3OA at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

I'm messing around with another old pc power supply and found that the top
of one of the 200v 330mF caps is giving 150v when connected to ground. Is
this normal? The other caps have no problems.

Yes, I discovered this through physical contact with the cap. My wife
thought a small animal was released in the room by the yelp I made. :-)

JSR/

The case of electrolytic caps is usually connected to the negative terminal and negative doesn't always mean ground.
The voltage rating is a maximum working voltage, normally the actual voltage is 10 to 40 % lower than the max.
Old, and new, PC power supplies operating off 120VAC use a doubler circuit to generate the HOT side DC voltage supply.
This means one of the two big caps can have its positive terminal connect to ground and the negative terminal can be -150 to -170 VDC with respect to ground.
Together they make about 300 to 340 VDC on the HOT side for conversion to the low operating voltages.
When these supplies are used on 240VAC the don't need to double, just rectifying gives the 300 - 340 VDC.
That's what the 120V/240V switch does, selects whether the doubling takes place.

Tom R.

( sometimes I think I get carried away )
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111227/df8feb53/attachment.htm>

From josiah at josiahritchie.com  Tue Dec 27 13:09:58 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Tue, 27 Dec 2011 14:09:58 -0500
Subject: [MakeLV] Makelehighvalley Digest, Vol 14, Issue 14
In-Reply-To: <1325011617.13566.YahooMailNeo@web130203.mail.mud.yahoo.com>
References: <mailman.1.1324667852.25038.makelehighvalley_makelehighvalley.com@makelehighvalley.com>
	<1325011617.13566.YahooMailNeo@web130203.mail.mud.yahoo.com>
Message-ID: <CANyh6VsXcPk96mdh_jJeX+vow-=YZtSGpsXe5FMaYR55pZ7tuw@mail.gmail.com>

On Tue, Dec 27, 2011 at 1:46 PM, Mr Thomas Rumpf <tronwizard at yahoo.com> wrote:
>
> The case of electrolytic caps is usually connected to the negative terminal
> and negative doesn't always mean ground.
> The voltage rating is a maximum working voltage, normally the actual voltage
> is 10 to 40 % lower than the max.
> Old, and new, PC power supplies operating off 120VAC use a doubler circuit
> to generate the HOT side DC voltage supply.
> This means one of the two big caps can have its positive terminal connect to
> ground and the negative terminal can be -150 to -170 VDC with respect to
> ground.
> Together they make about 300 to 340 VDC on the HOT side for conversion to
> the low operating voltages.
> When these supplies are used on 240VAC the don't need to double, just
> rectifying gives the 300 - 340 VDC.
> That's what the 120V/240V switch does, selects whether the doubling takes
> place.
>
> Tom R.
>
> ( sometimes I think I get carried away )

I appreciate you getting carried away enough to not only bottom post,
but also strip out the extra information. :-)

So what I'm hearing is that it's normal for one of the two big cap's
casing to be 150VDC different from ground because that casing is
negative and the positive is approximately equivalent to ground for
that cap due to the doubling. If I was providing 240VAC, this wouldn't
happen?

I found the doubling information especially interesting as I'd been
wondering about how that switch on the back was handled. Feel free to
expound on my questions any time. :-)

JSR/



From saxywolf at gmail.com  Thu Dec 29 15:12:26 2011
From: saxywolf at gmail.com (Ellis Farmer)
Date: Thu, 29 Dec 2011 16:12:26 -0500
Subject: [MakeLV] Meeting tonight
Message-ID: <CAJeZOyFf=2ywsm7+3XYkxrBSLxrLG-O855Wp3OBPaNEWBYj8Mw@mail.gmail.com>

It's on the calendar... but I can't make it.

Who's going?  I thought Matthew would appreciate a few confirmations in the
middle of the holiday season.


On a side note, does anyone know where to get steel channels with bolt
holes every 1" to 2"?  There must be a steel supplier somewhere nearby with
a catalog or something.  At worst, maybe some place that I can stop by and
pick through scraps or miscellaneous pieces.

-Ellis
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111229/0e06e925/attachment.htm>

From mtuerk at allentownedc.com  Thu Dec 29 16:02:54 2011
From: mtuerk at allentownedc.com (Matthew Tuerk)
Date: Thu, 29 Dec 2011 17:02:54 -0500
Subject: [MakeLV] Meeting tonight
In-Reply-To: <CAJeZOyFf=2ywsm7+3XYkxrBSLxrLG-O855Wp3OBPaNEWBYj8Mw@mail.gmail.com>
References: <CAJeZOyFf=2ywsm7+3XYkxrBSLxrLG-O855Wp3OBPaNEWBYj8Mw@mail.gmail.com>
Message-ID: <1E5F925C-A359-4C24-AA73-5CB75A5CE517@allentownedc.com>

I'll be there!
Matthew Tuerk

Assistant Director
Allentown Economic Development Corporation
(610) 435-8890 (w)
(610) 653-3064 (c)
mtuerk at allentownedc.com

facebook.com/AllentownEDC

twitter.com/AllentownEDC

CONFIDENTIALITY NOTICE The information in this email may be confidential and/or privileged. This email is intended to be reviewed by only the individual or organization named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this email and its attachments, if any, or the information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system.




On Dec 29, 2011, at 4:12 PM, Ellis Farmer wrote:

> It's on the calendar... but I can't make it.
> 
> Who's going?  I thought Matthew would appreciate a few confirmations in the middle of the holiday season.
> 
> 
> On a side note, does anyone know where to get steel channels with bolt holes every 1" to 2"?  There must be a steel supplier somewhere nearby with a catalog or something.  At worst, maybe some place that I can stop by and pick through scraps or miscellaneous pieces.
> 
> -Ellis
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111229/0c015bed/attachment.htm>

From whatever at taggers.org  Thu Dec 29 17:02:24 2011
From: whatever at taggers.org (whatever)
Date: Thu, 29 Dec 2011 18:02:24 -0500
Subject: [MakeLV] Meeting tonight
In-Reply-To: <1E5F925C-A359-4C24-AA73-5CB75A5CE517@allentownedc.com>
References: <CAJeZOyFf=2ywsm7+3XYkxrBSLxrLG-O855Wp3OBPaNEWBYj8Mw@mail.gmail.com>
	<1E5F925C-A359-4C24-AA73-5CB75A5CE517@allentownedc.com>
Message-ID: <4EFCF180.4040107@taggers.org>

i'll be leaving in like 10 minutes
On 12/29/2011 5:02 PM, Matthew Tuerk wrote:
> I'll be there!
>
>
>   Matthew Tuerk
>
> Assistant Director
> Allentown Economic Development Corporation
> (610) 435-8890 (w)
> (610) 653-3064 (c)
> mtuerk at allentownedc.com <mailto:mtuerk at allentownedc.com>
>
> facebook.com/AllentownEDC <http://facebook.com/AllentownEDC>
>
> twitter.com/AllentownEDC <http://twitter.com/AllentownEDC>
>
> /CONFIDENTIALITY NOTICE The information in this email may be 
> confidential and/or privileged. This email is intended to be reviewed 
> by only the individual or organization named above. If you are not the 
> intended recipient or an authorized representative of the intended 
> recipient, you are hereby notified that any review, dissemination or 
> copying of this email and its attachments, if any, or the information 
> contained herein is prohibited. If you have received this email in 
> error, please immediately notify the sender by return email and delete 
> this email from your system./
> /
> /
>
>
>
> On Dec 29, 2011, at 4:12 PM, Ellis Farmer wrote:
>
>> It's on the calendar... but I can't make it.
>>
>> Who's going?  I thought Matthew would appreciate a few confirmations 
>> in the middle of the holiday season.
>>
>>
>> On a side note, does anyone know where to get steel channels with 
>> bolt holes every 1" to 2"?  There must be a steel supplier somewhere 
>> nearby with a catalog or something.  At worst, maybe some place that 
>> I can stop by and pick through scraps or miscellaneous pieces.
>>
>> -Ellis
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com 
>> <mailto:Makelehighvalley at makelehighvalley.com>
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111229/1e0257d3/attachment.htm>

From david at davincisciencecenter.org  Thu Dec 29 20:57:26 2011
From: david at davincisciencecenter.org (David Smith)
Date: Thu, 29 Dec 2011 21:57:26 -0500
Subject: [MakeLV] Steel channel
Message-ID: <CAKY0pFQN570namiR1Umv-DA6Yf8i4gDBte-AKEjo0gAP0QHdGQ@mail.gmail.com>

Would shelving standards work? I know the holes are not that close,
though.

Dave

On Thu, Dec 29, 2011 at 4:12 PM, Ellis Farmer <saxywolf at gmail.com> wrote:

> It's on the calendar... but I can't make it.
>
> Who's going?  I thought Matthew would appreciate a few confirmations in
> the middle of the holiday season.
>
>
> On a side note, does anyone know where to get steel channels with bolt
> holes every 1" to 2"?  There must be a steel supplier somewhere nearby with
> a catalog or something.  At worst, maybe some place that I can stop by and
> pick through scraps or miscellaneous pieces.
>
> -Ellis
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>


-- 
David L. Smith, Ph.D.
Director, Teacher Professional Development



3145 Hamilton Blvd Bypass
Allentown, PA 18103-3686
484-664-1002 x111
david at davincisciencecenter.org
http://www.davincisciencecenter.org


<http://www2.davincisciencecenter.org/wp-content/uploads/2011/04/Icons-for-E-Mail-Signature.png>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111229/d5ac18ba/attachment.htm>

From josiah at josiahritchie.com  Fri Dec 30 08:26:00 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Fri, 30 Dec 2011 09:26:00 -0500
Subject: [MakeLV] Liability Insurance
Message-ID: <CANyh6Vu9xaBJgpd_q=_p27jAhpZj03my_Qqp770+8ryijkJ_FQ@mail.gmail.com>

As I understand it, the next step we really must take is to get
liability insurance for the "club". This is a pre-req for a lease on
the space allowing us more consistent time in the space.

There has been a discussion at School Factory about insurance for
hacker spaces, but not much info that is very useful at this point.
There are a couple places to contact though.

https://atrium.schoolfactory.org/spacefed/node/37703

I talked briefly to State Farm awhile back and they sounded like they
could provide what we'd be interested in, but I didn't narrow down on
it.

JSR/

-- 

http://about.me/josiah



From david at davincisciencecenter.org  Fri Dec 30 20:14:13 2011
From: david at davincisciencecenter.org (David Smith)
Date: Fri, 30 Dec 2011 21:14:13 -0500
Subject: [MakeLV] Liability Insurance
In-Reply-To: <CANyh6Vu9xaBJgpd_q=_p27jAhpZj03my_Qqp770+8ryijkJ_FQ@mail.gmail.com>
References: <CANyh6Vu9xaBJgpd_q=_p27jAhpZj03my_Qqp770+8ryijkJ_FQ@mail.gmail.com>
Message-ID: <CAKY0pFTtW3oaDWqgk=zFsK6iYjmkoB5P7OYGbW1FG4zebsap=Q@mail.gmail.com>

I can also get the contact info for Da Vinci Science Center's local agent,
who could probably help us sort out what was needed.

Dave

On Fri, Dec 30, 2011 at 9:26 AM, Josiah Ritchie <josiah at josiahritchie.com>wrote:

> As I understand it, the next step we really must take is to get
> liability insurance for the "club". This is a pre-req for a lease on
> the space allowing us more consistent time in the space.
>
> There has been a discussion at School Factory about insurance for
> hacker spaces, but not much info that is very useful at this point.
> There are a couple places to contact though.
>
> https://atrium.schoolfactory.org/spacefed/node/37703
>
> I talked briefly to State Farm awhile back and they sounded like they
> could provide what we'd be interested in, but I didn't narrow down on
> it.
>
> JSR/
>
> --
>
> http://about.me/josiah
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>



-- 
David L. Smith, Ph.D.
Director, Teacher Professional Development



3145 Hamilton Blvd Bypass
Allentown, PA 18103-3686
484-664-1002 x111
david at davincisciencecenter.org
http://www.davincisciencecenter.org


<http://www2.davincisciencecenter.org/wp-content/uploads/2011/04/Icons-for-E-Mail-Signature.png>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111230/22972722/attachment.htm>

From whatever at taggers.org  Fri Dec 30 20:37:02 2011
From: whatever at taggers.org (whatever)
Date: Fri, 30 Dec 2011 21:37:02 -0500
Subject: [MakeLV] Liability Insurance
In-Reply-To: <CAKY0pFTtW3oaDWqgk=zFsK6iYjmkoB5P7OYGbW1FG4zebsap=Q@mail.gmail.com>
References: <CANyh6Vu9xaBJgpd_q=_p27jAhpZj03my_Qqp770+8ryijkJ_FQ@mail.gmail.com>
	<CAKY0pFTtW3oaDWqgk=zFsK6iYjmkoB5P7OYGbW1FG4zebsap=Q@mail.gmail.com>
Message-ID: <4EFE754E.9030805@taggers.org>

well there is a bunch of things we should be working on....
Collecting Membership fees
Organizing as some kind of business structure (costs)
Getting the RFID thing working
Getting Insurance (costs)

Grants would also be good but the .. lvedc (i ferget the actual name) 
was taking care of that for us.

It occurs to me since Elis has been gone we have just been building not 
actually working on this stuff... holidays may have played into this.
Note: i am going to be missing every other Thursday for a couple months.



From josiah at josiahritchie.com  Fri Dec 30 20:51:40 2011
From: josiah at josiahritchie.com (Josiah Ritchie)
Date: Fri, 30 Dec 2011 21:51:40 -0500
Subject: [MakeLV] Liability Insurance
In-Reply-To: <CAKY0pFTtW3oaDWqgk=zFsK6iYjmkoB5P7OYGbW1FG4zebsap=Q@mail.gmail.com>
References: <CANyh6Vu9xaBJgpd_q=_p27jAhpZj03my_Qqp770+8ryijkJ_FQ@mail.gmail.com>
	<CAKY0pFTtW3oaDWqgk=zFsK6iYjmkoB5P7OYGbW1FG4zebsap=Q@mail.gmail.com>
Message-ID: <CANyh6Vv-tFXCwpL8nVs1dZnHMYs9ZToGNHMCTX2F0L=2hHHWzQ@mail.gmail.com>

Oh, that's a great idea. They'd at least have the right concept.

Thanks,
JSR/

On Fri, Dec 30, 2011 at 9:14 PM, David Smith <david at davincisciencecenter.org
> wrote:

> I can also get the contact info for Da Vinci Science Center's local agent,
> who could probably help us sort out what was needed.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20111230/bc145bdb/attachment.htm>

