[MakeLV] AVR Programming

[Will]

You need a programmer.
http://tom-itx.dyndns.org:81/~webpage/boards/USBTiny_Mkii/USBTiny_Mkii_index.php
(friend of mine, you can talk to him on #avr on freenode or in
#robotics).
Other fun tools (that are free) would be the Eclipse IDE. For
starters, always good to get some LED's make sure a few are infrared.
As we move past blinking lights we'll work on things such as motor
controls or wireless communications (with infrared!). If you don't
have them, bread boards and see if you go to adafruit or some place
and get a lot of through hole resistors.

-Will

On Mon, Sep 12, 2011 at 3:55 PM, Josiah Ritchie
<josiah at josiahritchie.com> wrote:
> We've talked about putting together a desk for microcontroller programming.
> What hardware and software will we need to do that well? I know a Linux box
> with avrdude can handle the software side of things, but how about the
> hardware?
> This popped into my head again because of the latest related hardware from
> adafruit: http://ladyada.net/library/tools/standaloneisp.html
> JSR/
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>