[MakeLV] hackerspace passport

[Ike Dahlinger]

Anyone have some Sugru handy? That would work great. They even have a how
to make a rubber stamp tutorial on their site.
- Ike



On Mon, Jul 2, 2012 at 4:23 PM, David Smith
<david at davincisciencecenter.org>wrote:

> Alright, What size is the stamp?
>
> Dave
>
>
> On Mon, Jul 2, 2012 at 4:15 PM, Rob Roschewsk <rob at pabut.org> wrote:
>
>> maybe a little more if we scuff the surface with medium sand paper ....
>> ??
>>
>> OR ....
>>
>> get some CRAYOLA MODELING CLAY .... flatten out a piece and press the
>> logo into it to make a NEGATIVE ... what for it to dry and press the
>> negative into another piece of clay to make a positive ...
>>
>> if you haven't worked with it before CRAYOLA MODELING CLAY dries to an
>> almost Styrofoam consistency
>>
>>
>> On Mon, Jul 2, 2012 at 7:54 PM, David Smith <
>> david at davincisciencecenter.org> wrote:
>>
>>> Only issue is that the ABS print wouldn't hold much, if any, ink.
>>>
>>> Dave
>>>
>>> On Mon, Jul 2, 2012 at 3:16 PM, Josiah Ritchie <josiah at josiahritchie.com
>>> > wrote:
>>>
>>>> Here's the Hive4a thing Rob is talking about. Dave was talking about
>>>> printing it out on a raft anyway. I like where this is going. :-) Put some
>>>> spongy foam double-sided tape between the hive4a plastic and the block of
>>>> wood for that spongy effect maybe?
>>>>
>>>> http://www.thingiverse.com/thing:26095
>>>>
>>>> JSR/
>>>>
>>>>
>>>> On Mon, Jul 2, 2012 at 3:14 PM, Rob Roschewsk <rob at pabut.org> wrote:
>>>>
>>>>> Just thinking ...... if someone has one of those Hive4A 3D prints we
>>>>> were doing at the Science Fair ....
>>>>>
>>>>> (like these
>>>>> http://www.facebook.com/media/set/?set=a.333712270023210.77977.136884579705981&type=3
>>>>> )
>>>>>
>>>>> glue them to a block of wood (face down) and see it you can stamp with
>>>>> it .... ???
>>>>>
>>>>> On Mon, Jul 2, 2012 at 7:00 PM, Mitch Carney <mitch.carney at gmail.com>
>>>>> wrote:
>>>>> > If someone can send me the graphics used so far I could try and make
>>>>> > something in gimp/gimpshop but I don't know how to make it into an
>>>>> > actual stamp somone mentioned something about making a stamp but I
>>>>> > don't know where to start nor have the money to get one. we could
>>>>> also
>>>>> > just use a sharpie and printout stencil until we get something more
>>>>> > formal.
>>>>> >
>>>>> > On Mon, Jul 2, 2012 at 2:56 PM, Josiah Ritchie <
>>>>> josiah at josiahritchie.com> wrote:
>>>>> >> No one has taken lead on this idea yet.
>>>>> >>
>>>>> >> JSR/
>>>>> >>
>>>>> >> On Mon, Jul 2, 2012 at 2:54 PM, Mitch Carney <
>>>>> mitch.carney at gmail.com> wrote:
>>>>> >>>
>>>>> >>> is anyone going to make a passport stamp for the hive4a? I remember
>>>>> >>> someone mentioning it at one of the meetings. I was reading about
>>>>> >>> mitch altman @
>>>>> >>> http://owni.eu/2012/02/08/mitch-altman-hacker-diy-hackerspace/
>>>>> >>> and want to reiterate the thought I heard that we should try to
>>>>> make a
>>>>> >>> passport stamp for him to have.
>>>>>
>>>>
>>>> _______________________________________________
>>>> Makelehighvalley mailing list
>>>> Makelehighvalley at makelehighvalley.com
>>>>
>>>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>>>
>>>>
>>>
>>>
>>> --
>>> David L. Smith, Ph.D.
>>> Director, Teacher Professional Development
>>>
>>>
>>>
>>> 3145 Hamilton Blvd Bypass
>>> Allentown, PA 18103-3686
>>> 484-664-1002 x111
>>> david at davincisciencecenter.org
>>> http://www.davincisciencecenter.org
>>>
>>>
>>>
>>> <http://www2.davincisciencecenter.org/wp-content/uploads/2011/04/Icons-for-E-Mail-Signature.png>
>>>
>>> _______________________________________________
>>> Makelehighvalley mailing list
>>> Makelehighvalley at makelehighvalley.com
>>>
>>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>>
>>>
>>
>> _______________________________________________
>> Makelehighvalley mailing list
>> Makelehighvalley at makelehighvalley.com
>>
>> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>>
>>
>
>
> --
> David L. Smith, Ph.D.
> Director, Teacher Professional Development
>
>
>
> 3145 Hamilton Blvd Bypass
> Allentown, PA 18103-3686
> 484-664-1002 x111
> david at davincisciencecenter.org
> http://www.davincisciencecenter.org
>
>
>
> <http://www2.davincisciencecenter.org/wp-content/uploads/2011/04/Icons-for-E-Mail-Signature.png>
>
> _______________________________________________
> Makelehighvalley mailing list
> Makelehighvalley at makelehighvalley.com
>
> http://makelehighvalley.com/mailman/listinfo/makelehighvalley_makelehighvalley.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://makelehighvalley.com/pipermail/makelehighvalley_makelehighvalley.com/attachments/20120703/c910ddd9/attachment.htm>